Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Belmonte Granite bullnose is a laminate edge molding that finishes exposed edges on countertops, islands, desks, and work stations using a coordinated Belmonte Granite pattern. This molding creates a bullnose profile, so exposed laminate edges present a rounded, finished shape rather than a sharp or unfinished edge. The edge molding is 1-1/2 inches high and 144 inches long, giving ample coverage for typical residential or commercial top runs in a single continuous piece. This laminate edge molding is part of Formica IdealEdge, so it provides a decorative solution designed specifically for finishing laminate surfaces. The product uses a moisture barrier MDF core, which supports edge stability when installed in typical countertop and work surface environments where liquids and cleaning are common. The 10 year limited warranty, covering delamination of the edge, gives long-term performance assurance for finished laminate projects.
This Formica IdealEdge bullnose edge molding is designed for use on countertops, islands, desks, and work stations, so its dimensions and shape match typical horizontal laminate assemblies. The 1-1/2 inch height allows the profile to cover the build-down or substrate edge while aligning with the laminate surface on top, creating a unified bullnose appearance. The edge molding is engineered for straight, curved, clipped, and 90 degree edges, which lets installers carry the same Belmonte Granite profile through inside corners, outside corners, and gentle curves without changing to a different product. Formica recommends AFF522 series glue for this molding, so the bond line and working time are matched to the laminate edge material. The 12 foot length keeps splices to a minimum, which supports smoother visual lines on longer tops.
This Formica Corporation laminate edge molding is classified as a decorative edge molding, so it is intended to finish exposed laminate edges rather than structural components. The Belmonte Granite design and Etchings finish match Formica surfacing, which lets installers carry the same pattern from the horizontal surface onto the bullnose edge for countertops, islands, desks, and work stations. Because the profile works on straight, curved, clipped, and 90 degree edges, it suits layouts ranging from simple straight kitchen runs to reception desks with radiused ends or clipped corners. The 1-1/2 inch height covers the front build-down of many laminate countertops, adding a continuous bullnose look that can visually upgrade laminate work surfaces in residential, commercial, or shop environments where Formica laminate is specified.
The moisture barrier MDF core in this IdealEdge bullnose molding provides a stable backing beneath the laminate, which supports consistent adhesion when used with the recommended AFF522 series glue. The 144 inch length of each piece allows long runs to be edged with minimal joints, so installers can maintain straight, uninterrupted sight lines and reduce alignment work at seams. The ability to use the same Belmonte Granite bullnose on straight, curved, clipped, and 90 degree edges simplifies layout planning, because the same profile can transition through inside corners and soft radius ends without changing the visual language. With a 10 year limited warranty that covers delamination of the edge, the product is positioned for projects where long-term edge bond performance is part of the specification. These combined details help installers deliver repeatable, finished results on laminate tops using a single coordinated edge solution.
The Formica IdealEdge Belmonte Granite bullnose edge molding measures 1-1/2 inches high and 144 inches long, which suits many standard laminate countertop, island, desk, and work station applications.
This Formica IdealEdge bullnose is used to finish laminate edges on countertops, islands, desks, and work stations, carrying the Belmonte Granite pattern and Etchings finish down the front edge.
The laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can work across different layout conditions on the same project.
The IdealEdge Belmonte Granite bullnose uses a moisture barrier MDF core, providing a stable substrate for the laminate edge in typical countertop and work surface environments.
Formica recommends AFF522 series glue for this edge molding, aligning adhesive properties with the laminate edge material for a suitable bond.
The 10 year limited warranty on this Formica IdealEdge product covers delamination of the edge, supporting confidence in the bond over the life of typical installations.
This Formica IdealEdge Belmonte Granite bullnose edge molding combines a 1-1/2 inch profile, 144 inch length, and moisture barrier MDF core to support countertop, island, desk, and work station edges. The Belmonte Granite pattern with Etchings finish lets the edge visually align with Formica laminate surfaces across straight, curved, clipped, and 90 degree conditions. For installers and fabricators working with laminate tops, this single bullnose profile provides a coordinated, warrantied edge solution that fits long runs and varied layouts with one product choice.
Sold In: 1 Each