Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Carrara Bianco edge molding gives a finished look on all sides of a laminate top, so countertops, islands, desks, and work stations present a continuous, professional edge instead of a raw laminate line. The Carrara Bianco design with matte finish ties directly to Formica laminate patterns, so color and pattern carry cleanly from surface to edge for a coordinated installation. The double radius edge profile is built into this molding, so both exposed sides read as eased curves rather than sharp corners, which changes how the edge feels in daily contact areas. A 1-1/2 inch height matches typical laminated top build-ups, so the face height covers the substrate edge while aligning with standard deck thickness. At 144 inches in length, each molding spans long runs of counter or desk without frequent joints, which reduces layout time and minimizes visible seams on straight or gently curved sections.
This Formica laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it is dimensioned and detailed around those typical substrate and overhang conditions. The manufacturer specifies a moisture barrier MDF core, which gives the molding a stable base for adhesive bonding while adding resistance to moisture exposure around sink and work areas. Recommended glue for installing this molding is the AFF522 series, sold separately, and that guidance aligns adhesive selection with the material and core so the edge bonds properly to the prepared substrate. The double radius profile is formed into the molding, so once it is bonded and trimmed at the ends, the top and bottom curves define the finished feel of the edge without additional shaping.
This Formica IdealEdge Carrara Bianco laminate edge molding is specified for use on countertops, islands, desks, and work stations, so its 1-1/2 inch height and 144 inch length are tuned to common casework and cabinet layouts in kitchens, offices, and shop environments. Being suitable for straight, curved, clipped, and 90 degree edges, the same molding can follow a long straight run, wrap an outside or inside corner, and transition around clipped corners without changing profiles, which keeps the visual line consistent. On curved or clipped layouts, the double radius edge presents a smooth contour to users moving past the edge, which is useful in high-traffic or shared work areas. The Carrara Bianco pattern with matte finish extends the appearance of Formica laminate tops onto the edge band, so the surface and edge read as one continuous design rather than separate materials.
The moisture barrier MDF core in this molding supports its role at the perimeter of countertops and work stations, where incidental moisture can be present; this core construction adds protection beneath the laminate face so the edge detail better resists everyday exposure. The 12 foot length allows installers to run the edge along a full counter or island side without frequent butt joints, which reduces alignment work and helps seams fall at planned breaks instead of mid-span. The manufacturer notes a 10 year limited warranty that covers delamination of the edge, which underscores the expectation that the bond between the laminate surface and the MDF core will remain intact during normal service. Using the recommended AFF522 series glue, sold separately, ties the adhesive choice to the laminate and core combination, which supports a strong bond where the edge meets the substrate and helps the double radius profile stay tight to the top over time.
This Formica IdealEdge Carrara Bianco edge molding is 144 inches long, which lets installers span long countertop, island, desk, or work station runs with fewer joints.
This Carrara Bianco IdealEdge molding is specified for countertops, islands, desks, and work stations, so it fits typical laminate casework and work surface applications.
This Formica laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can handle varied plan shapes on a project.
The IdealEdge Carrara Bianco molding has a 1-1/2 inch height, allowing it to cover common countertop build-ups and align visually with standard laminated tops.
This IdealEdge molding uses a moisture barrier MDF core, providing a stable base for bonding and added resistance in typical countertop and work station environments.
The manufacturer recommends AFF522 series glue, sold separately, for this molding, aligning the adhesive with the laminate and moisture barrier MDF core construction.
This Formica IdealEdge 6696-58 Carrara Bianco matte finish double radius edge molding brings laminate-grade detailing to countertops, islands, desks, and work stations that need a finished look on all sides. The 1-1/2 inch height, 144 inch length, and moisture barrier MDF core come together in a profile that is suitable for straight, curved, clipped, and 90 degree edges, so one molding can carry a consistent Carrara Bianco edge around complex plans. Use this laminate edge molding where a matched Formica surface, rounded edge feel, and long-run coverage matter for your next top build.
Sold In: 1 Each