Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge bullnose molding in the 9284-RD Classic Crystal Granite Radiance finish provides a finished look on all sides, so laminate countertops, islands, desks, and work stations present a continuous decorative edge instead of exposed core material. This laminate edge molding is part of the Formica Ideal Edge offering, giving a coordinated bullnose profile that visually matches the Classic Crystal Granite Radiance laminate surface for a unified appearance across the whole top. The 1-1/2 inch height works with common countertop build-ups where a full-profile bullnose is desired, allowing installers to cover the front edge cleanly. The 144 inch (12 foot) length spans long runs in one piece, which reduces field joints along straight or curved edges. The moisture barrier MDF core supports edge durability in normal interior environments by limiting edge swelling where the molding meets the laminate surface.
This Formica IdealEdge 9284-RD Classic Crystal Granite Radiance bullnose molding is designed as a laminate edge molding for countertops, islands, desks, and work stations, so its 1-1/2 inch height aligns with typical countertop edge build-ups. The matching 1-1/4 inch profile provides an additional height option within the same visual design, which gives fabricators flexibility when working with different substrate thicknesses. The 12 foot length helps installers run a continuous bullnose along the front of long tops, minimizing joints that would interrupt the Classic Crystal Granite pattern. Formica recommends the AFF522 series glue for this Ideal Edge molding, so adhesive selection can be coordinated with that specification during fabrication. The moisture barrier MDF core supports bond performance at the edge where routine cleaning and day-to-day use concentrate moisture exposure.
This Formica IdealEdge 9284-RD Classic Crystal Granite Radiance finish bullnose edge molding is designed for use on countertops, islands, desks, and work stations, so it aligns well with both residential and commercial laminate surface layouts in those categories. Its suitability for straight, curved, clipped, and 90 degree edges means an entire run, from a long straight section to an outside or inside corner, can maintain the same bullnose profile. The 1-1/2 inch height works with common countertop edge constructions, covering the build-up and front face so the core is not visible when viewed from normal working positions. With a 12 foot length, fabricators can span a typical kitchen or work station front in one continuous piece, keeping the Classic Crystal Granite Radiance pattern and bullnose contour consistent. The moisture barrier MDF core supports this use by addressing edge exposure where users rest arms, move equipment, or wipe surfaces on a daily cycle.
The Formica IdealEdge bullnose molding construction provides a finished look on all sides, which simplifies layout decisions because the exposed underside at overhangs reads as intentional instead of as raw substrate. The Classic Crystal Granite Radiance finish is tied to the 9284-RD design, so fabricators working with that laminate can select this molding to carry the same visual language across every exposed edge. Having both 1-1/2 inch and 1-1/4 inch profiles within the Ideal Edge line allows consistent detailing across areas with different build-up heights while keeping the same decorative pattern. Suitability for straight, curved, clipped, and 90 degree edges means jigs and templates can be planned around one edge style, which streamlines routing and trimming steps. The moisture barrier MDF core is part of the edge structure, supporting the bond line along the bullnose where incidental spills, cleaning liquids, and general wear tend to concentrate over the life of the installation.
This Formica IdealEdge bullnose molding uses the Classic Crystal Granite Radiance finish, so it visually coordinates with laminate in the same 9284-RD design for a unified countertop or work surface appearance.
This laminate edge molding is for use on countertops, islands, desks, and work stations, so it suits laminate projects that need a finished bullnose edge in those applications.
This Ideal Edge molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one bullnose profile to carry across different edge conditions in the same installation.
This Formica IdealEdge bullnose molding has a 1-1/2 inch profile height and a 144 inch (12 foot) length, covering standard countertop edges and long runs in a single piece.
This Ideal Edge molding uses a moisture barrier MDF core, which supports edge performance where everyday use and cleaning concentrate moisture along the bullnose.
This Formica IdealEdge molding has a recommended glue from the AFF522 series, so adhesive choice can follow that specification during fabrication and installation planning.
The Formica IdealEdge 9284-RD Classic Crystal Granite Radiance bullnose edge molding brings a finished look on all sides to countertops, islands, desks, and work stations, tying directly into the 9284-RD laminate design. Its 1-1/2 inch profile height and 12 foot length support typical countertop build-ups and long edges with a single continuous piece. Suitability for straight, curved, clipped, and 90 degree edges lets one bullnose detail carry through the entire layout, while the moisture barrier MDF core supports edge performance in everyday interior use. For projects built around Formica Corporation surfaces from Wurth Baer Supply, this Ideal Edge molding provides a coordinated, laminate-based bullnose solution ready for fabrication.
Sold In: 1 Each
