
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formica IdealEdge Fantasy Marble is a laminate edge molding designed to finish exposed laminate countertop, island, desk, and workstation edges with a decorative profile that matches the surface. The 9302-34 Fantasy Marble Scovato finish gives the edge a coordinated look with Fantasy Marble laminate, so the edge reads as part of the overall surface instead of a separate strip. This molding uses an ogee profile at 1-1/2 inches high, so it creates a shaped transition from horizontal surface to vertical edge that hides the laminate edge line. The product is supplied in a 144 inch, or 12 foot, length that lets you span long runs of countertop or island edge in a single piece, which reduces edge joints along the run. As a laminate edge molding in the Formica IdealEdge family, it is intended to provide a fabricated, finished-edge appearance without custom edge fabrication.
This Formica laminate edge molding is built as an ogee profile, so its geometry is set up to terminate laminate countertops, islands, desks, and workstations that are planned for an ogee face. The product height of 1-1/2 inches means it is sized to align with common laminate edge build-ups, so the molding can be positioned to cover the vertical laminate edge from deck down to the bottom of the build-up. Because the molding is a continuous 12 foot length, installers can cut it to exact run dimensions on site, which lets each span be trimmed for the specific edge it will finish. As part of the IdealEdge line, it is specified for straight, curved, clipped, and 90 degree edges, so one profile can address multiple edge shapes across a project.
This laminate edge molding is described for use on countertops, islands, desks, and work stations, so it is intended to finish horizontal laminate work surfaces in both residential and commercial-type layouts. The ability to handle straight, curved, clipped, and 90 degree edges means a single molding profile can run across a long straight section, turn an outside corner, or follow a curved bar-top edge without switching to a different edge type, which simplifies product selection. The 12 foot length gives enough material to edge larger islands or extended desks, so longer spans can be addressed with one piece that is cut back to size for that run. The 1-1/2 inch profile height allows the molding to visually cover the vertical build-up edge, which keeps the design intent consistent across various stations or counters in the same space.
This IdealEdge laminate edge molding uses a moisture barrier MDF core, so the body of the molding is designed to resist moisture movement entering from typical countertop environments, which supports edge stability over time. Formica specifies recommended glue from the AFF522 series for this product, so the bonding approach is aligned with the laminate edge materials to support adhesion along the full length. The edge molding carries a 10 year limited warranty that covers delamination of the edge, so the bond between laminate and core is backed for a defined period, which matters when planning long-term countertop, island, desk, or workstation installations. Because it is a Formica Corporation laminate edge molding in the IdealEdge family, it is matched to laminate surfacing workflows used by fabricators who work with Formica decorative laminates.
This IdealEdge Fantasy Marble ogee molding is 1-1/2 inches high and 144 inches long, so it spans typical countertop edge build-ups and covers long runs in a single piece.
This edge molding is for use on countertops, islands, desks, and work stations, so it is aimed at finishing laminate work surfaces with a Fantasy Marble ogee profile.
The IdealEdge Fantasy Marble ogee molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to follow varied edge geometries on a project.
This Formica IdealEdge laminate molding uses a moisture barrier MDF core, which is designed to limit moisture effects on the core in normal laminate edge environments.
This IdealEdge Fantasy Marble molding lists recommended glue from the AFF522 series, aligning the adhesive selection with the laminate edge materials for bonding.
This Formica IdealEdge Fantasy Marble Scovato molding carries a 10 year limited warranty that covers delamination of the edge for projects planned around long-term use.
This Formica IdealEdge Fantasy Marble Scovato ogee molding from Wurth Baer Supply is built for fabricators and installers finishing laminate countertops, islands, desks, and work stations with a coordinated Fantasy Marble edge. The 1-1/2 inch height, 12 foot length, and ogee profile let you address straight, curved, clipped, and 90 degree edges with one laminate edge solution that visually matches the deck. For projects calling for laminate edge moldings with a moisture barrier MDF core and a 10 year limited warranty against edge delamination, this Fantasy Marble ogee profile provides a defined, repeatable option.
Sold In: 1 Each