Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Geriba Gray is a laminate edge molding that gives a finished look on all sides, so exposed countertop or work surface edges present a continuous, uniform appearance. The 9308-46 Geriba Gray design in Etchings Finish provides a defined decorative surface, helping visually tie the edge into matching laminate layouts. This IdealEdge molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to address varied layout conditions on the same project. The 1-1/2 inch height supports taller edge details, matching the 1-1/2 inch profile option noted for this line. A 12 foot length allows longer countertop runs or island sides to be edged with fewer joints, which reduces layout breaks. The moisture barrier MDF core provides a stable base for the laminate edge, supporting long-term bond performance along exposed runs.
This laminate edge molding is specified at 1-1/2 inches high, so it aligns with build-up heights that require that edge reveal on countertops or work stations. The 12 foot length supports continuous edging on long runs, reducing edge joints that need on-site blending. Suitability for straight, curved, clipped, and 90 degree edges means the same Geriba Gray Etchings profile can follow outside corners, inside angles, and radius ends on an installation. A moisture barrier MDF core forms the structural center of the piece, providing a consistent bonding surface when used with the recommended AFF522 series glue (sold separately). The 10 year limited warranty covering edge delamination supports long-term use where bonded edges are exposed to routine service conditions.
This Formica IdealEdge laminate edge molding is specified for use on countertops, islands, desks, and work stations, so it fits a broad range of horizontal work surfaces in the same project. The Geriba Gray 9308-46 design in Etchings Finish helps coordinate with matching or complementary Formica surfacing, supporting a consistent finish between top and edge. A 1-1/2 inch profile height works with thicker edge build-ups often used on islands and feature counters. Because the molding is suitable for straight, curved, clipped, and 90 degree edges, installers can follow various plan shapes and corner details without switching edge systems. The moisture barrier MDF core provides a consistent base in these locations, supporting the laminate face along exposed perimeters.
The defined 1-1/2 inch height gives a predictable edge reveal, helping layout and trimming remain consistent between sections. The 12 foot length reduces the number of field joints on long counters or work stations, which helps maintain visual continuity and reduces edge transition finishing. Suitability for 90 degree edges allows the Geriba Gray profile to turn corners cleanly, while straight and curved edge compatibility supports sweeping runs and radius ends without changing materials. The moisture barrier MDF core under the laminate face supports bond performance along exposed runs when paired with the specified AFF522 series glue (sold separately). The 10 year limited warranty focused on edge delamination provides defined coverage for the bonded molding, supporting repeatable performance on future jobs that use the same specification.
This product is a Formica IdealEdge laminate edge molding that gives a finished look on all sides, so laminate countertops and similar surfaces gain a decorative, wrapped edge.
This IdealEdge laminate edge molding is for use on countertops, islands, desks, and work stations, so it serves a range of horizontal work surfaces in one project.
The edge molding is 1-1/2 inches high and 144 inches long, providing a tall edge profile and a 12 foot run for long counters or island sides.
The moisture barrier MDF core provides a stable substrate under the laminate facing, supporting bond performance along exposed edges during normal service.
The recommended glue is the AFF522 series (sold separately), specified by Formica for bonding this IdealEdge laminate edge molding to appropriate substrates.
This IdealEdge laminate edge molding has a 10 year limited warranty that covers delamination of the edge, providing defined support for bonded installations.
This Formica IdealEdge 9308-46 Geriba Gray laminate edge molding in Etchings Finish offers a 1-1/2 inch high waterfall profile in a 12 foot length, suitable for straight, curved, clipped, and 90 degree edges on countertops, islands, desks, and work stations. The moisture barrier MDF core, specified AFF522 series glue (sold separately), and 10 year limited delamination warranty together support consistent, long-term edge performance. For projects using Geriba Gray surfaces where a finished look on all sides is needed, this IdealEdge molding provides a coordinated, job-ready edge solution.
Sold In: 1 Each