Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 9309-46 Star Dune is an ogee edge molding designed to finish exposed laminate edges, so countertops and work surfaces get a continuous, built-in look instead of a raw substrate line. This molding is part of the IdealEdge line from Formica Corporation, so it integrates with Formica laminate surfaces in color and profile where the design matches the Star Dune pattern. The Etchings finish on this Star Dune profile provides a textured surface, which helps the edge visually tie into similar Etchings finish laminates on the flat surface. A 1-1/2 inch height gives coverage over standard laminate build-ups, helping conceal the transition from deck to edge. The 144 inch length allows long runs on countertops, islands, desks, and work stations with fewer seams to align. Its moisture barrier MDF core supports laminate bonding along the profile while resisting everyday moisture exposure at the edge.
This Formica IdealEdge ogee edge molding is designed for use on countertops, islands, desks, and work stations, so its geometry matches typical laminate deck thicknesses and overhangs in those applications. The 1-1/2 inch height works with common build-up methods to cover the deck edge and substrate in one pass, so installers can set the molding to the laminate surface and trim the bottom to the cabinet face as needed. The moisture barrier MDF core is engineered for bonding laminate, giving a consistent surface for adhesive spread and clamping pressure along the entire 144 inch length. Recommended glue is the AFF522 series, sold separately, which provides a pairing identified by the supplier for this edge system. Because this molding is suitable for straight, curved, clipped, and 90 degree edges, fabricators can carry the same profile around corners and arcs, helping maintain a continuous look across complex plan shapes.
This Formica IdealEdge ogee edge molding is specified for use on countertops, islands, desks, and work stations, so it targets the horizontal work surfaces most common in residential and commercial laminate installations. Being suitable for straight, curved, clipped, and 90 degree edges allows this single profile to handle perimeter runs, inside corners, outside corners, and gentle radius fronts, which simplifies profile selection when a project mixes linear and curved sections. The 1-1/2 inch height is intended to span the full front build-up on these surfaces, so the front appearance stays consistent from one cabinet section to the next. With a 144 inch length, long island or desk runs can be handled with a single piece in many layouts, reducing the need to position joints at less-visible locations. The Star Dune design in Etchings finish integrates with matching Formica laminate patterns where those are specified, keeping the edge color and texture aligned with the deck.
The moisture barrier MDF core in this laminate edge molding is engineered as a stable base for the decorative surface, which supports consistent bonding along tight ogee curves and flat sections. That core design matters on busy fronts of countertops, islands, desks, and work stations where spills and cleaning contact the edge first. The recommendation to use AFF522 series glue, sold separately, identifies an adhesive family matched to this edge construction, which helps installers plan materials that work with the MDF core and laminate surface. The 10 year limited warranty focused on delamination underscores the long-term bond expectations for the edge, which is important where repeated contact and movement occur at the front of work surfaces. Because the profile is suitable for straight, curved, clipped, and 90 degree edges, fabricators can run the same Star Dune Etchings finish profile around an entire project, helping maintain alignment of pattern and shadow line at every transition.
This IdealEdge molding is for use on countertops, islands, desks, and work stations, aligning its profile and length with typical laminate work surface applications in shops and on site.
The Formica IdealEdge 9309-46 Star Dune molding is 144 inches, or 12 feet, long, which allows long edges on countertops, islands, desks, and work stations to be handled with fewer joints.
This ogee edge molding is 1-1/2 inches high, giving coverage over common laminate build-ups so the front edge hides substrate transitions along the countertop or desk face.
The Star Dune IdealEdge molding uses a moisture barrier MDF core, providing a stable bonding surface for the laminate and helping the edge handle everyday moisture at the front of work surfaces.
This molding has a recommended glue listed as the AFF522 series, sold separately, giving installers an adhesive family specified for this laminate edge construction.
This Formica IdealEdge molding carries a 10 year limited warranty that covers delamination of the edge, defining support for the bonded laminate profile over time.
This Formica IdealEdge 9309-46 Star Dune ogee molding gives laminate countertops, islands, desks, and work stations a finished front in the same Star Dune Etchings design used on the deck. With a 1-1/2 inch height, 144 inch length, and moisture barrier MDF core, it is built to span common build-ups and provide a bondable substrate along straight, curved, clipped, and 90 degree runs. Using the recommended AFF522 series glue, sold separately, aligns installation materials with the edge construction. For projects specifying Formica Corporation Star Dune in Etchings finish, this IdealEdge profile from Wurth Baer Supply ties the laminate surface and front edge into one coordinated run.
Sold In: 1 Each