Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge bullnose gives laminate countertops, islands, desks, and work stations a finished look on all sides by carrying the surface design over a shaped edge, which helps projects read as one continuous top rather than a laminated build-up.
The 9476-46 White Ice Granite Etchings finish matches the corresponding Formica laminate pattern, so the bullnose edge visually ties into the top surface and supports consistent appearance across the run.
The 1-1/2 inch height works with common countertop build-ups, giving enough face to cover the edge detail while presenting a balanced reveal from the front.
The 144 inch (12 foot) length spans most residential and commercial runs, which reduces the number of seams along the front edge and keeps the visual line cleaner over long countertops or work stations.
As a laminate edge molding in the IdealEdge family from Formica Corporation, this bullnose is designed specifically to finish decorative edges in laminate-based installations.
This Formica IdealEdge laminate edge molding uses an MDF core, so it is intended to be bonded along the edge of countertops, islands, desks, and work stations where a stable, machinable substrate is needed under the decorative surface.
The bullnose profile is suitable for straight, curved, clipped, and 90 degree edges, allowing installers to carry one edge detail across different conditions without changing profiles, which simplifies layout and profile selection.
The recommended glue is the AFF522 series (sold separately), so adhesive selection can follow Formica guidance for this edge, which supports bond performance along the MDF core and laminate interface.
The 1-1/2 inch height and 12 foot length give fabricators predictable dimensions to plan cuts, miters, and transitions, helping align runs with the underlying substrate layout.
This laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it fits both residential and commercial surfaces that need a finished bullnose along the front or exposed sides.
The White Ice Granite Etchings finish lets the edge line up visually with Formica surfaces in the same pattern, which helps designers carry the 9476-46 look through corners, peninsulas, and full-height edges.
Because the bullnose profile works with straight, curved, clipped, and 90 degree edges, it can follow complex plans where tops wrap around corners, curve into seating areas, or terminate in clipped ends while keeping a consistent front contour.
The 12 foot length supports long islands or work stations in one continuous piece along many fronts, so runs can be planned to minimize visible joints directly in the user sightline.
The laminate edge molding sits within the broader category of decorative edge moldings, which means it is intended as a visible finished component rather than a hidden structural piece.
The MDF core under the laminate provides a uniform material thickness for routing, trimming, and bonding, which helps installers achieve a smooth bullnose contour across the entire 1-1/2 inch height without soft spots or voids in the profile.
The integrated moisture barrier supports edge performance at the front of countertops, where spills or routine cleaning hit first, which matters in work stations and break areas that see regular moisture exposure along the edge.
The 10 year limited warranty covering delamination of the edge reflects Formica Corporations support for the bond between laminate and core, which is important in high-use tops where edges experience repeated contact and wear.
The specific 9476-46 White Ice Granite designation identifies the color and Etchings finish combination, which helps shops order consistently for repeat projects and service work using the same edge look.
The manufacturer part number 094762046D12000 ties directly to this bullnose configuration, giving purchasing teams a clear reference for reordering and keeping inventory aligned to the installed profile and finish.
As part of Formica IdealEdge, the bullnose edge is designed to give a finished look on all sides, which helps fabricators carry the same profile around exposed ends and returns, so the installation reads as a complete, intentional edge treatment.
This is a Formica IdealEdge laminate edge molding with a bullnose profile, used to give countertops, islands, desks, and work stations a finished decorative edge.
The edge molding is 1-1/2 inches high and 144 inches long, so it covers standard countertop edge build-ups and runs across long sections in one piece.
The edge molding is for use on countertops, islands, desks, and work stations, giving these surfaces a finished bullnose along exposed edges.
The IdealEdge bullnose has an MDF core, providing a stable base for the laminate and supporting clean machining and bonding along the edge.
The moisture barrier in the edge construction helps resist moisture exposure at the front of countertops, which supports performance in everyday wet or cleaning conditions.
This Formica IdealEdge laminate edge molding uses AFF522 series glue as the recommended adhesive, supporting a bond suited to the MDF core and laminate surface.
This Formica IdealEdge 9476-46 White Ice Granite bullnose edge molding brings together a matched Etchings finish, 1-1/2 inch height, and 12 foot length to handle exposed edges on countertops, islands, desks, and work stations with one coordinated profile.
The MDF core, moisture barrier, and AFF522 series adhesive recommendation support a stable, bonded laminate edge, while the 10 year limited warranty covering delamination backs long-term edge performance.
Use this Formica Corporation laminate edge molding when a continuous bullnose in the White Ice Granite design is needed to carry the surface look over the front and exposed sides of laminate-based projects.
Sold In: 1 Each
