Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Quartzite Bianco creates a decorative laminate ogee edge that finishes exposed sides on countertops, islands, desks, and work stations, giving the job a consistent look from the horizontal surface down the profile. This IdealEdge laminate edge molding uses the Quartzite Bianco design in Scovato finish, so the visual carries over the edge where the surface turns down. The molding measures 1-1/2 inches high and 144 inches long, so one continuous stick can run the full length of many standard tops without seams along the edge run. As part of the Laminate Edge Moldings class from Formica Corporation, it integrates with laminate surfacing workflows where the installer is already bonding sheet laminate. The ogee shape builds a shaped front edge rather than a square band, which changes the feel and finished appearance of the top.
This Formica IdealEdge laminate edge molding is designed to be bonded using glue, and the recommended adhesive is the AFF522 series glue, sold separately, which ties the product into a specific adhesive system. Using glue suited to laminate bonding supports the ogee profile staying tight against the substrate along both the upper and lower curves. The molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can follow multiple plan shapes around a countertop or work station. The 1-1/2 inch height works with those edge conditions by providing enough material to follow the vertical drop while still presenting the Quartzite Bianco Scovato finish consistently.
This Formica IdealEdge Quartzite Bianco laminate edge molding is intended for use on countertops, islands, desks, and work stations, so it fits into both residential and commercial laminate top builds that need a shaped front. The ogee profile runs along straight sections, around curved layouts, across clipped corners, and at 90 degree edges, which lets one molding style continue around a full installation instead of switching profiles. The 12 foot length suits longer counters and islands, allowing fabricators to keep the Quartzite Bianco Scovato pattern continuous along the front. With a moisture barrier MDF core, the molding also introduces a core designed with moisture barrier characteristics into the edge build, which is relevant in sink areas and high-use work surfaces.
The moisture barrier MDF core in this IdealEdge molding works with laminate bonding practices to provide a stable edge substrate, which supports the bond line when the recommended AFF522 series glue is used on the laminated edge. The Quartzite Bianco design in Scovato finish across the ogee shape keeps the decorative surface and edge aligned, which reduces visual breaks between the horizontal laminate sheet and the edge molding. The 1-1/2 inch height provides material to trim or flush to the deck and underside as needed during fabrication, helping the installer tune the edge line. The 10 year limited warranty covering delamination of the edge reflects Formica Corporationâs stated backing of the bond over time, which matters for tops in regular daily service where the front edge sees repeated contact.
This product is a Formica IdealEdge laminate edge molding with an ogee profile in the Quartzite Bianco design, used to create a finished decorative edge on countertops, islands, desks, and work stations.
The molding is 1-1/2 inches high and 144 inches long, providing a full 12 foot run for edging longer countertop, island, desk, or work station fronts without short segments.
The edge molding is suitable for straight, curved, clipped, and 90 degree edges, so it can follow many common countertop and work station layouts with a single profile.
The edge molding has a moisture barrier MDF core, which provides a core structure with moisture barrier characteristics for the decorative laminate ogee edge.
The recommended glue for this Formica IdealEdge laminate edge molding is the AFF522 series glue, sold separately, aligning the product with a specified adhesive line.
The Formica IdealEdge Quartzite Bianco molding carries a 10 year limited warranty that covers delamination of the edge, defining a stated warranty period for the laminated edge bond.
This Formica IdealEdge Quartzite Bianco Scovato ogee molding is built for countertops, islands, desks, and work stations where a shaped laminate front edge is needed. The 1-1/2 inch height, 12 foot length, moisture barrier MDF core, and compatible AFF522 series glue support predictable fabrication. The Quartzite Bianco design in Scovato finish maintains the decorative pattern from the surface over the ogee profile. For projects using laminate surfacing and seeking a formed front edge, this Formica Corporation Laminate Edge Molding offers a defined format and part number for job planning.
Sold In: 1 Each