Revolution Miter Gauge SawStop TSA-RMG is a SawStop miter gauge designed for accurate angle work on compatible saws. The miter angle dial offers preset increments of 1 degree, 1/2 degree, 1/4 degree, or 1/10 degree, which lets you dial in exact angles instead of estimating between marks. Tactile feedback as you turn the dial lets you feel each increment click into place, helping you land on the intended angle without watching the scale constantly. This setup makes angle adjustments reliably accurate, so miter and bevel work can be repeated from piece to piece. A heavy-duty build supports this precision so the setting you choose on the dial translates into consistent cuts on the work surface.
The steel miter plate is manufactured with machine tolerances of less than .001 inch, which supports a closely fitting interface in the saws miter slot so the gauge tracks straight as it is installed and used. The miter angle dial with its preset increments lets you move from one angle to another in controlled steps during setup, rather than relying on trial-and-error moves. Tactile feedback at each increment supports quick confirmation that the angle change has been made before the workpiece is brought to the fence. The sliding wedge system for fence attachments gives an adjustable mounting point on the gauge body, so a fence or stop setup can be aligned once and then shifted along the wedge track for different work lengths while keeping the relationship to the gauge consistent.
This Revolution Miter Gauge - SawStop TSA-RMG is listed as compatible with ICS, PCS, CNS, JSS, and CTS saw models, so it is suited to installations across that SawStop range. The steel miter plate with machine tolerances of less than .001 inch is built for precise guidance in the miter slot of those saws, supporting straight travel throughout the cut. The sliding wedge system for fence attachments allows a fence to be positioned along the gauge to reach workpieces of varying size on these machines without changing the basic gauge-to-slot relationship. The tool-free articulating flip stop supports repeatable cuts up to 37-1/2 inches in length on compatible saw tables, which is useful when running multiple workpieces to the same dimension on ICS, PCS, CNS, JSS, or CTS saws.
The miter angle dial with preset 1 degree, 1/2 degree, 1/4 degree, or 1/10 degree increments is designed to make angle adjustments reliably accurate, so once a target angle is chosen you can return to it again later using the same dial setting. Tactile feedback at each increment gives a physical confirmation that the setting has reached the next step, which helps avoid minor drift when making fine changes for detailed joinery. The sliding wedge system for fence attachments and repeatable stops lets you set a fence position once and then use the same configuration for multiple cuts, which reduces layout time when batching parts. The tool-free articulating flip stop, rated for repeatable cuts up to 37-1/2 inches in length, adds a consistent length reference that swings out of the way when not needed, supporting both single and batch cuts on the same setup. Mounting holes on the flip stop allow jigs to be fastened to it or locked into the wedge system, so specialty fixtures can benefit from the same repeatable angle and length settings provided by the gauge.
The TSA-RMG is a SawStop Revolution Miter Gauge with a miter angle dial and sliding wedge system, used to set and guide precise angled cuts on compatible saws.
The miter angle dial with tactile feedback provides preset increments you can feel click into place, supporting reliably accurate angle adjustments during setup and repeated cutting.
The TSA-RMG miter angle dial has preset increments of 1 degree, 1/2 degree, 1/4 degree, or 1/10 degree, giving fine control over angle settings for detailed or repetitive work.
The sliding wedge system for fence attachments allows fences and repeatable stops to be adjusted along the miter gauge, supporting consistent referencing for multiple workpiece lengths.
The tool-free articulating flip stop is designed for repeatable cuts up to 37-1/2 inches in length, giving a fixed reference point for series cutting operations.
The TSA-RMG Revolution Miter Gauge is compatible with SawStop ICS, PCS, CNS, JSS, and CTS models, aligning the gauge to the miter slots of those saws.
The Revolution Miter Gauge - SawStop TSA-RMG pairs a miter angle dial with tactile feedback, a sliding wedge system for fence attachments, and a tool-free articulating flip stop to support repeatable cuts up to 37-1/2 inches. Heavy-duty construction with a steel miter plate manufactured with machine tolerances of less than .001 inch supports precise tracking in compatible SawStop saws, including ICS, PCS, CNS, JSS, and CTS. A 1 year warranty backs this SawStop miter gauge, giving a defined support period for shop planning. For projects where angle accuracy and repeatable length settings drive the workflow, this TSA-RMG configuration offers a structured, dial-based approach to miter gauge setup.
Sold In: 1 Each