Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3522-58 Perlato Granite creates a finished bullnose edge on laminate tops using a laminate edge molding matched to the Perlato Granite pattern. The 1-1/2 inch height covers a standard countertop edge build-up, which helps hide the substrate and gives the top a more substantial look. The 144 inch length runs a full 12-foot span in one piece, which reduces visible seams along straight runs. The matte finish keeps light reflection down on working surfaces, which supports a softer, stone-like appearance in shop or residential settings. As a laminate edge molding from Formica Corporation, it pairs with Formica laminate programs so projects can carry the same Perlato Granite design from deck to edge. The bullnose profile rounds the front edge visually, which can soften transitions between horizontal tops and vertical cabinet faces.
This Formica IdealEdge bullnose edge molding uses a 1-1/2 inch height that aligns with common laminate deck plus build-up thicknesses, so shops can plan the core stack to sit fully behind the profile. The 144 inch length supports layouts for kitchen runs, reception counters, or other straight spans where a continuous edge is preferred, allowing cuts to be placed at outside or inside corners instead of mid-run. As a laminate edge molding, it is intended to work at the exposed front or side edges of laminate surfaces, so fabricators can size their substrate and laminate overhangs with this finished dimension in mind. The Perlato Granite matte finish ties directly to the surface pattern choice, simplifying layout decisions when matching sheets and edges from the same design family.
This Formica IdealEdge 3522-58 Perlato Granite bullnose edge molding fits projects built around the Formica Perlato Granite laminate pattern, because the molding carries the same design reference. The 1-1/2 inch height works along exposed front edges of laminate countertops, islands, or workbenches where the build-up thickness aligns with that dimension, so the molding hides the substrate while presenting a consistent bullnose. With a 144 inch length, it suits long straight sections such as kitchen runs or commercial counters where minimizing joints along the front is important. As a product in the laminate edge moldings class, it also suits decorative edging on laminate-clad furniture or casework tops that use Formica Perlato Granite as the primary surface.
The 1-1/2 inch height on this Formica laminate edge molding gives fabricators a known dimension to design around, which supports repeatable build-ups that land the laminate seam and substrate within the profile. The 144 inch length allows cut planning so that seams can be placed where design and traffic patterns tolerate them best, which can reduce rework caused by misaligned pattern breaks. The matte finish on the Perlato Granite design helps the edge read consistently with matte laminate sheets, which supports a unified look across deck and edge without a change in gloss level. Because the molding is part of the Formica IdealEdge line from Formica Corporation, shops working regularly with Formica laminate can keep pattern, finish, and edge profile tied to a single manufacturer, which streamlines specification and repeat orders on follow-up jobs.
This Formica IdealEdge bullnose edge molding is 1-1/2 inches high and 144 inches long, which supports standard laminate countertop build-ups and long, continuous front edges.
This edge molding uses the Formica 3522-58 Perlato Granite design, which lets the bullnose profile visually match laminate tops using the same pattern reference.
The matte finish on this Perlato Granite edge molding lowers surface sheen, which helps it blend with matte laminate tops and limits glare under task or ambient lighting.
This Formica Perlato Granite piece is a laminate edge molding in the Formica IdealEdge line, designed to finish exposed edges on laminate-based surfaces.
A 1-1/2 inch bullnose edge molding is typically used on laminate countertops or similar tops where the deck and build-up thickness align with that height for full edge coverage.
Part number 035222058D12000 identifies this specific Formica IdealEdge Perlato Granite matte finish bullnose molding, which aids in reordering the same pattern and size.
This Formica IdealEdge 3522-58 Perlato Granite matte finish bullnose edge molding from Formica Corporation offers a 1-1/2 inch high, 144 inch long profile matched to the Perlato Granite design, supporting laminate projects that need a continuous decorative front edge. For work built around Formica Perlato Granite, this molding lets you carry the same pattern, finish, and bullnose shape across exposed edges so tops present as a coordinated assembly.
Sold In: 1 Each