Amerock Kontour Series 3 in (76 mm) Center to Center Satin Nickel Pull, -BP36564G10

Amerock Kontur Series 3 In Pull For Cabinets

Amerock Kontur Series 3 in pull is a satin nickel cabinet handle designed around a bold profile with a contemporary vibe, so it delivers a clean modern look wherever you install it. The 3 in (76 mm) center-to-center hole spacing aligns with common cabinet drilling patterns, which helps simplify layout when you are updating doors and drawers. A length of 4 in gives you a substantial hand grip relative to its compact size, which supports confident opening on everyday-use cabinets. The 1-1/2 in projection stands the pull off the front of the cabinet, creating comfortable finger clearance as you reach behind the handle. A slim 5/8 in width keeps the pull visually streamlined, which works well across banks of doors and drawers without looking heavy. The Kontur Collection design makes a modern statement that complements any decor, allowing you to carry one style through an entire room.

Key Kontur Pull Details For Cabinet Projects

• The Kontur Collection profile creates a bold, contemporary vibe, which helps align hardware style with modern cabinet lines in kitchens, baths, and built-ins.
• The satin nickel finish establishes a neutral metallic look, so it works alongside a wide range of stain colors, paints, and surfacing materials on cabinetry.
• The 3 in (76 mm) center-to-center dimension matches a widely used drilling standard, helping you reuse existing holes during hardware change-outs.
• The 4 in overall length provides a solid gripping area along the pull, which supports comfortable operation on doors and small to medium drawers.
• The 1-1/2 in projection creates working space behind the pull, improving finger clearance and reducing contact with the cabinet surface during use.
• The 5/8 in width keeps the pull visually light across multiple fronts, helping banks of cabinets look consistent without appearing bulky.
• The zinc/stainless steel material combination provides a sturdy metal construction, supporting everyday cabinet use in residential and similar environments.

Installation-Oriented Details For Amerock Kontur Pull

The 3 in (76 mm) center-to-center measurement is the key installation dimension, because it defines the hole spacing you align to when drilling new fronts or matching existing bores. With a 4 in overall length over that 3 in spread, the pull provides edge distance at each end, which helps maintain material strength around the mounting points on typical cabinet rails and drawer fronts. The 1-1/2 in projection sets the standoff from the cabinet face, creating a consistent reveal that looks even when multiple pulls are lined up across a run of cabinets. Its 5/8 in width lets you position the pull on narrower rails or drawer faces while still keeping a balanced appearance. The satin nickel finish and contemporary form allow this handle to integrate smoothly into modern cabinet layouts during both new installations and hardware replacement work.

Using The Kontur Satin Nickel Pull In Practice

Where The Amerock Kontur Pull Fits Best

The Amerock Kontur Series 3 in (76 mm) center-to-center pull is suited to cabinet doors and drawers that follow the common 3 in drilling pattern, so it is a direct style upgrade on many existing installations. Its 4 in length over a 3 in spread works well on standard-width doors and on smaller drawer fronts, giving you enough bar to grasp without overwhelming narrow faces. The 1-1/2 in projection provides functional clearance for fingers between the pull and the door or drawer surface, which supports smooth operation on frequently used openings such as base cabinets and vanity drawers. With a 5/8 in width and a contemporary profile from the Kontur Collection, the pull visually lines up across cabinet banks, helping create continuous hardware lines on runs of wall and base cabinets. The satin nickel finish keeps the look neutral, so it can be applied across different rooms while maintaining a consistent appearance.

Details That Support Consistent Cabinet Results

The 3 in (76 mm) center-to-center dimension on this pull directly supports repeatable drilling, because you can use a standard 3 in cabinet jig or template to lay out holes. Its 4 in overall length over that fixed spread gives you predictable end overhang, making it easier to keep pulls aligned to stiles or drawer edges for straight sightlines. The 1-1/2 in projection remains consistent from piece to piece, which helps create an even stand-off along a run of doors and drawers and reduces visual variation. A 5/8 in width makes it straightforward to center the pull on frames and drawer fronts without crowding narrow rails, aiding symmetry from cabinet to cabinet. The zinc/stainless steel material foundation provides a solid metal feel during operation, supporting reliable opening and closing on everyday-use cabinets across the installation.

Common Questions About Amerock Kontur Cabinet Pulls

Selecting This Kontur Pull For Cabinet Projects

The Amerock Kontur Series 3 in pull pairs a 3 in (76 mm) center-to-center layout with a 4 in overall length, so it suits many standard cabinet drilling setups while delivering a contemporary profile. Its 1-1/2 in projection and 5/8 in width combine to balance comfortable hand clearance with a streamlined look across doors and drawers. With zinc/stainless steel construction and a satin nickel finish, this BP36564G10 handle supports consistent style and performance across kitchen, bath, or built-in cabinet runs.