SurfPrep 120 Grit 6 x 89 Edge Sanding Belt is an aluminum oxide belt on a cloth backing that is designed for edge sanding where consistent stock removal and surface preparation are needed. The 120 grit rating provides a medium-fine cut that smooths workpiece edges while still leaving enough tooth for subsequent finishing steps. The 6 inch by 89 inch size matches edge sanding setups that call for this belt dimension, so the belt tracks on the machine as intended and maintains full contact across the sanding platen. As an abrasive belt in the Abrasive Belts category, it is suited to continuous sanding passes along straight or lightly profiled edges in woodworking and similar shop environments.
This SurfPrep edge sanding belt is sized at 6 inches by 89 inches, so it fits belt paths built for that length and width, helping the belt tension system operate within its intended range. The cloth-backed construction allows the belt to flex around the drive and idler drums while staying firm across the platen area, which supports a flat contact patch for edge sanding. As a SurfPrep abrasive belt identified by manufacturer part number SP689120CAO, it can be specified with confidence when matching documented 6 x 89 belt requirements on shop equipment.
As part of the Abrasive Belts product class, the SurfPrep 120 Grit 6 x 89 Edge Sanding Belt slots into edge sanding operations where a belt-driven platen handles straight or slightly contoured parts. The 6 inch width gives good coverage on cabinet doors, drawer components, and similar stock sized for edge sanders built around this belt dimension. Because it is an aluminum oxide belt on cloth, it is well aligned with the general abrasive needs found in woodworking-focused shops supplied by Wurth Baer Supply. The medium-fine 120 grit finish supports tasks where edges need refinement after shaping or machining while still preparing the surface for additional finishing stages.
The SurfPrep designation and SP689120CAO part number clearly tie this belt to a specific configuration, which simplifies reordering the exact same 6 x 89, 120 grit aluminum oxide cloth belt when standardizing processes. The aluminum oxide abrasive on cloth backing combines cutting power with controlled flexibility, helping the belt conform slightly to minor edge irregularities while maintaining a predictable scratch pattern. That predictable cut allows installers and shop teams to dial in sanding times so that parts coming off the edge sander match the surface expectations set for downstream finishing. Being part of the Abrasive Belts category from Wurth Baer Supply places this belt within a broader abrasive system that supports woodworking industry workflows, so specifying this SurfPrep 120 grit belt can align with existing abrasive standards in professional shops.
The SurfPrep SP689120CAO belt measures 6 inches by 89 inches, so it suits edge sanding machines designed around that belt length and width.
This SurfPrep 6 x 89 abrasive belt is 120 grit, giving a medium-fine cut that prepares edges for further finishing steps.
This SurfPrep belt uses aluminum oxide abrasive, providing a general-purpose cutting action suitable for many edge sanding tasks.
The SurfPrep 120 grit 6 x 89 belt has a cloth backing, supporting stability under tension as it tracks around the edge sander path.
This SurfPrep belt is classified in the Abrasive Belts category, placing it among belts intended for continuous sanding operations.
The belt is identified as SurfPrep 120 Grit 6 x 89 Edge Sanding Belt Aluminum Oxide on Cloth with manufacturer part number SP689120CAO.
The SurfPrep 120 Grit 6 x 89 Edge Sanding Belt Aluminum Oxide on Cloth offers a defined combination of size, grit, abrasive type, and backing for edge sanding tasks. When a 6 inch by 89 inch, 120 grit aluminum oxide cloth belt is specified, this SP689120CAO product from Wurth Baer Supply delivers that exact configuration so sanding results can align with established shop standards and repeatable finishing targets.
Sold In: 1 Each