Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sink Setter 14 to 16 kit is an adjustable sink support system designed to carry the weight of undermount and drop-in sinks from the cabinet structure instead of the countertop edge. The PW-99-P Sink Setter adjusts from 14 inches to 26 inches front to back, so it spans a wide range of cabinet depths for kitchen and bath work. This install kit is typically used in front-to-back installations in standard cabinets, giving a straight, predictable load path to the cabinet sides. It is also used side to side in narrow cabinets, so you can still support the sink when front-to-back space is limited. The Sink Setter brand design works with many undermount layouts, so installers can stabilize the bowl and control elevation during set up.
The PW-99-P Sink Setter can be installed after the countertop is installed, so the top can be templated and set before dialing in sink support. Because the bars adjust from 14 inches to 26 inches, the installer positions them to match the cabinet interior dimension and the sink bowl location. The Sink Setter works with cast iron and small single bowl stainless steel sinks, which often need firm vertical control under the rim, so the support can be tuned to hold the sink elevation. Its use with some bathroom sinks and most undermount sink installations lets installers follow the same support method across kitchen and bath layouts.
The PW-99-P Sink Setter is typically used in front-to-back installations in standard cabinets, so it fits common kitchen sink base layouts where the bar can run from the front rail toward the back panel. In narrow cabinets, the same adjustable bars are installed side to side, so they span between the cabinet walls when depth is tight but width is available. Because the system is designed for any cast iron sink and small single bowl stainless steel sink, it suits heavy kitchen bowls as well as compact single-bowl layouts. Its compatibility with some bathroom sinks means the same kit can support smaller lavatory bowls where cabinet access is limited but a rigid support line is still required.
The 14 inch to 26 inch adjustment range lets the PW-99-P Sink Setter match the actual interior span, so the bars can bear directly on the cabinet structure rather than relying on shims or improvised blocking. Being able to install the Sink Setter after the countertop is installed keeps the sink support work independent from templating and setting the top, which helps maintain countertop alignment while still allowing precise bowl positioning. Using the system with any cast iron sink and small single bowl stainless steel sink means the support is sized for higher-weight loads, so it carries the bowl rather than leaving that strain on adhesive or clips alone. Its use with most undermount sink installations, including some bathroom sinks, allows installers to standardize on one support approach for multiple sink types, which simplifies layout, speeds repeated setups, and helps keep rim height consistent from job to job.
The PW-99-P Sink Setter is typically used front to back in standard cabinets and side to side in narrow cabinets, so it adapts to both common and tight cabinet interiors.
The PW-99-P Sink Setter adjusts from 14 inches to 26 inches long, so it can be set to match various cabinet depths or spans without cutting the support bars.
The PW-99-P Sink Setter can be installed after the countertop is installed, so sink support setup follows the templating and setting of the top.
The PW-99-P Sink Setter is designed for any cast iron sink and small single bowl stainless steel sink, so it fits common kitchen sink materials.
The PW-99-P Sink Setter can be used with some bathroom sinks, so it can support selected lavatory bowls in addition to kitchen sinks.
The PW-99-P Sink Setter is designed for use with most undermount sink installations, so it helps carry the bowl weight from the cabinet structure.
The PW-99-P Sink Setter 14 to 16 kit provides an adjustable 14 inch to 26 inch support span that ties directly into standard or narrow cabinet structures. Its use with any cast iron sink, small single bowl stainless steel sink, some bathroom sinks, and most undermount sink installations lets installers apply one sink support method across varied projects. For kitchen and bath work where the sink load needs to transfer to the cabinet instead of relying on the countertop edge, this Sink Setter install kit delivers a consistent, repeatable support approach.
Sold In: 1 Kit
