Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sink Setter is a dedicated installation kit designed to hold and support kitchen sinks during the countertop bonding process, sized for sinks in the 31 to 47 inch range.
Undermount sink installation has one unforgiving window: the time between setting the bowl against the countertop and the moment the adhesive fully cures. For larger sinks in the 31 to 47 inch range, that window is harder to manage because the sink is heavier and spans more of the cabinet opening. The Sink Setter kit is built for exactly that moment, giving installers a reliable way to clamp and hold the sink from below without relying on temporary blocks, tape, or improvised bracing that can shift.
This size range covers the large single-bowl and equal or offset double-bowl sinks most commonly used in full kitchen runs, so it suits the majority of kitchen remodel and new-build sink installations where the sink spans a wide base cabinet.
The kit is engineered specifically for sink setting rather than adapted from general-purpose clamping hardware. That distinction matters when a heavy ceramic, quartz composite, or stainless sink is hanging below a countertop and needs even, consistent pressure held across the rim while the installer finishes up and steps away. The hardware in this kit is designed to apply that pressure predictably, which reduces the risk of an uneven bond line or a shifted sink that has to be reset after the adhesive has already begun to cure.
Kitchen installers and countertop fabricators running large undermount sinks on a regular basis get the most from this kit. It fits the larger end of the sink-size spectrum, so it is the right call when the job calls for a wide kitchen bowl rather than a bar or prep sink. Cabinet shops handling full kitchen installs and contractors managing countertop-and-sink work together will find the 31 to 47 inch range covers most of the large sink SKUs they encounter. Homeowners doing a one-time remodel can also use it for the same result: a cleanly set, properly supported sink that stays put through the cure.
The kit is sized for sinks in the 31 to 47 inch range. For smaller sinks, check the companion kits in the Sink Setter line that cover shorter size ranges.
The Sink Setter system is designed for undermount installation and works with the sink materials commonly used in that application, including stainless steel, quartz composite, and fireclay. Confirm the adhesive or bonding compound you are using is appropriate for the specific sink and countertop combination.
The source data does not specify reusability. Installers setting multiple sinks should confirm with the manufacturer whether the hardware is rated for repeated use.
As long as the overall sink dimension falls within 31 to 47 inches, this kit covers the installation. Bowl configuration, such as 60/40 or 50/50, does not change which size kit is needed.
For a wide kitchen sink that needs to stay exactly where it is set while the bond cures, the 31 to 47 inch Sink Setter kit gives installers and fabricators the hardware to do it cleanly and confidently the first time.
Sold In: 1 Kit
