Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Drywall Anchors No Screws 1-5/8 from MECHANICAL PLASTICS CORP are TOGGLER SnapSkru self-drilling drywall anchors designed to install as quickly as an ordinary self-drilling drywall auger anchor, so installers can fasten to drywall without a separate drilling step. The self-drilling design cuts directly into the drywall, turning screw-driving time into the only installation step for setting the anchor. A unique Snap Lock feature provides positive behind-the-wall locking similar to a toggle bolt, so the anchor engages the back of the drywall instead of relying only on threads in the gypsum. During installation the SnapSkru anchor keeps the wall material in compression, reinforcing the opening around the anchor for a more secure grip in the drywall surface. This compression action locks the anchor in the wall, which allows it to hold more than other auger-style anchors in comparable drywall applications.
This self-drilling drywall anchor is designed to go directly into drywall without predrilling, so installers can mark the location and drive the anchor in one step. The anchor behaves in use like an ordinary self-drilling drywall auger anchor, which allows the same screw-gun technique and driving feel that crews already know from auger-style products. As the SnapSkru anchor advances, it pulls the drywall face toward the back side, placing the wall material in compression so the core around the hole becomes part of the holding structure. When the Snap Lock feature engages behind the wall, the anchor locks into position, which stabilizes the installed point for later screw installation and tightening. This combination of self-drilling entry, compression of the wall, and behind-the-wall locking provides a fast workflow while delivering toggle-like anchor behavior.
The TOGGLER SnapSkru self-drilling drywall anchor is identified as a drywall anchor in the Fasteners | Wall Anchors category, so it is oriented around attaching components to drywall surfaces. Because it works as quickly and easily as an ordinary self-drilling drywall auger anchor, it fits projects where many fastening points must be set across interior drywall, such as mounting fixtures, brackets, or other hardware on finished walls. Its behind-the-wall locking and holding power similar to a toggle bolt means the anchor is suited to situations where the load must be carried by the backside of the drywall core rather than just surface threads. By keeping the wall material in compression during installation, the anchor reinforces the area around each hole, which is valuable on jobs where repeated adjustments or minor repositioning might otherwise weaken the drywall at the fastening zone.
The Snap Lock feature on this TOGGLER SnapSkru anchor provides a positive behind-the-wall lock, so after installation the anchor bears against the rear of the drywall similar to a toggle bolt, distributing force over a larger area than simple threaded anchors. This design, combined with keeping the wall material in compression, means the drywall itself becomes clamped between the front of the anchor and the locking section at the back, enhancing the structural contribution of the wall panel. That compression and locking action is described as allowing the anchor to hold more than other auger anchors, which directly affects how many anchors are needed to support comparable loads in similar drywall conditions. Because the anchor installs with the same straightforward driving motion as a self-drilling drywall auger anchor, crews gain the added holding capacity and toggle-like behavior without adding extra installation steps such as separate drilling or manual toggling behind the wall.
The Toggler 30011 is a SnapSkru self-drilling drywall anchor classified under Drywall Anchors in the Fasteners | Wall Anchors category, so it is designed specifically for fastening into drywall surfaces.
The SnapSkru self-drilling drywall anchor installs as quickly and easily as an ordinary self-drilling drywall auger anchor, so setting the anchor is done in one driving step without separate drilling.
The Snap Lock feature provides positive behind-the-wall locking and holding power like a toggle bolt, so the anchor grips the back of the drywall rather than relying only on surface threads.
The SnapSkru anchor keeps the wall material in compression, reinforcing and locking the anchor in the drywall, which improves holding strength around the hole during service.
This SnapSkru anchor installs like an ordinary self-drilling drywall auger anchor but, by locking behind the wall and compressing the drywall, it is described as holding more than other auger anchors.
The anchor is produced by MECHANICAL PLASTICS CORP under the TOGGLER SnapSkru line, with manufacturer part number 30011 for straightforward product identification.
The TOGGLER SnapSkru self-drilling drywall anchor from MECHANICAL PLASTICS CORP combines auger-style installation with a Snap Lock mechanism that delivers toggle-like behind-the-wall holding. By keeping the drywall in compression as it locks, this Drywall Anchors No Screws 1-5/8 model reinforces each mounting point for higher holding capacity than other auger anchors described in the same context. For projects that depend on reliable fastening into drywall surfaces, using this SnapSkru design helps align installation speed with the level of holding power expected on professional interior jobs.
Sold In: 1 Box