Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Cascata hidden shower bench bracket is designed to hold a solid surface bench of granite, quartz or concrete board and tile, so the bracket supports dense materials used in tiled shower seating. The Cascata bench support has 16 inch long sides, giving a stable footprint for distributing bench and user load along the wall. A short 1.5 inch down leg creates the mounting surface, so the bench appears as if floating out of the wall once finished. The Cascata bench support is designed to be relatively hidden while providing the required support for a granite or marble seat and a persons weight, which keeps the finished shower cleaner looking while maintaining support. It is made of stainless steel material, adding corrosion resistance in a wet area where moisture is constant.
The 1.5 inch down flange is used for mounting, so this surface becomes the primary interface between the Cascata shower bench support and the shower wall framing. Each mounting flange has 3 1/4 holes, giving six straight holes across the bracket for through-fastening into structure. The Cascata also has 14 inch long sides with a 2 inch gap in the rear, and these sides are designed to fit comfortably in a corner shower setting where two walls meet. Use shims during installation for out of square walls, which allows the installer to bring the bracket into plane before finishes are applied. The Cascata shower bench support can be installed pre-tile or tiled after using proper tools and waterproofing practices, allowing the installer to choose the sequence that best fits the project workflow.
The Cascata hidden shower bench bracke tby Federal Brac eis designed to hold a solid surface bench of granite, quartz or concrete board and tile, so it serves as the primary structural support under a rigid shower seat. The Cascata also has 14 inch long sides have a 2 inch gap in the rear and are designed to fit comfortably in a corner shower setting, positioning the support where two tiled walls intersect. This layout lets the installer run the bracket into the corner, so the seat spans out into the shower while load is carried back to both walls. The Cascata bench support has 16 inch long sides, providing reach into the shower footprint so more of the bench is backed by steel. The bracket is designed to be relatively hidden, so once the bench is faced with granite, marble, or tile, the steel is not prominent in the finished space.
The Cascata bench support has 16 inch long sides with a short 1.5 inch down leg that will have the bench appear as if floating out of the wall, so the mounting flange sits behind finishes while the horizontal leg carries the bench. The 1.5 inch down flange is used for mounting while the 0.50 L channels act as a gusset and provide the support required, tying the vertical and horizontal portions together for strength. Each mounting flange has 3 1/4 holes, so fasteners can be spaced along the flange to distribute pull-out forces into the wall framing. Material thickness is 0.25 inch, giving the bracket a substantial cross-section to resist bending under a granite or marble seat and a persons weight. It is made of stainless steel material which will add additional corrosion resistance in a wet area, so the structural section is not easily affected by repeated exposure to water.
The Cascata hidden shower bench bracket is designed to hold a solid surface bench of granite, quartz or concrete board and tile, so it works with typical rigid shower seating materials.
The Cascata bench support has 16 inch long sides with a short 1.5 inch down leg, so the mounting flange hides behind finishes while the bench appears as if floating out of the wall.
The Cascata shower bench support has sides designed to fit comfortably in a corner shower setting, so it mounts where two shower walls meet to support a corner bench.
The Cascata shower bench support can be installed pre-tile or tiled after using proper tools and waterproofing practices, which offers flexibility in project sequencing.
The bracket is made of stainless steel material which will add additional corrosion resistance in a wet area, supporting performance in ongoing shower moisture.
The 1.5 inch down flange is used for mounting while the 0.50 L channels act as a gusset and provide the support required for a solid surface seat and a persons weight.
The Cascata bench support is designed to hold a solid surface bench of granite, quartz or concrete board and tile, so it suits rigid shower seating. With 16 x 16 size, a 1.5 inch mounting flange, and 0.50 L channels for gusset support, it provides defined geometry for planning bench depth and anchor points. Stainless steel material and 0.25 inch thickness give a corrosion-resistant, structural bracket for wet-area bench construction. For shower projects using granite or marble seats where a floating look is desired, the Cascata hidden shower bench bracket offers a purpose-built support layout.
