Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
corbel mount system galvanized 4x2.5 describes a small, light duty mounting solution that pairs an L bracket and sleeve with your wood corbel, so the corbel carries decorative or light support roles without overbuilding the structure. The Federal Brace system is designed as a kit to work with a wood corbel, which lets you use the corbel style you want while relying on the steel hardware for the actual mounting. Routing the corbel to accept the sleeve gives the bracket a concealed, tailored fit, so the hardware stays out of sight in finished installations. The 4 x 2.5 size keeps the hardware compact under counters or shelves, which suits tight reveals and modest overhangs. A galvanized finish on both bracket and sleeve adds a protective layer that helps the steel resist typical shop and kitchen environments over time.
The Corbel Mount System by Federal Brace is described as making installation easy, because the L bracket and sleeve kit works from a straightforward routing and fitting sequence with a wood corbel. Following simple instructions to route your corbel and fit with the mounting system means the wood is shaped specifically to receive the 4 x 2.5 sleeve, creating a snug, guided pocket for the hardware. Using a galvanized 12 gauge bracket tied to a 16 gauge sleeve creates a stepped assembly, so you can plan your routing depth and corbel thickness around known steel dimensions. With two 0.25 inch and two 0.18 inch straight holes already punched in the bracket, the mount indicates clear points for anchoring into a counter subtop or wall cleat, which reduces layout time and helps maintain alignment across multiple corbels along a run.
The small 4 x 2.5 galvanized system works well under counters or shelves where a compact footprint keeps the hardware inside the corbel profile while still connecting to the supporting structure. Because the system is light duty capacity only, it suits installations where the corbel is primarily decorative or backing up modest overhangs rather than carrying substantial structural loads. The L bracket and sleeve kit format lets a wood corbel become the visible element, so you can match surrounding trim or cabinetry while relying on steel hidden inside for the actual connection. Using galvanized finish throughout helps the bracket and sleeve tolerate typical interior moisture and cleaning exposure around counters, which supports longevity in normal woodworking and cabinet environments.
The defined 4 x 2.5 size gives a fixed target when laying out routing templates for your wood corbels, which helps produce consistent pockets so each sleeve seats the same way along a countertop run. With a 12 gauge bracket and 16 gauge sleeve, the steel thicknesses remain predictable, allowing you to set routing depth and back clearance without guesswork when moving from one piece to the next. The combination of two 0.25 inch straight holes and two 0.18 inch straight holes provides separate mounting points that can be matched to different fastener diameters, which is useful when tying into varied substrates under counters or behind shelves. Light duty capacity only also guides how many mounts you distribute along a span, so the visual rhythm of corbels aligns with both design intent and the system's intended load role.
The Corbel Mount System by Federal Brace works with a wood corbel to make installation easy, providing an L bracket and sleeve kit so the corbel can be mounted under a counter or shelf.
The L bracket and sleeve kit is routed into the wood corbel and then fitted with the mounting system, so the steel hardware supports the corbel while remaining concealed in the routed pocket.
The small 4 x 2.5 galvanized system uses a defined size, helping you route the wood corbel and align the mount under counters or shelves with consistent spacing and projection.
The Corbel Mount System uses a 12 gauge bracket and a 16 gauge sleeve, which sets clear steel thicknesses for routing depth, fit, and fastener engagement into the assembled parts.
The bracket has two 0.25 inch straight holes and two 0.18 inch straight holes, giving multiple mounting points to spread load into the supporting structure under a counter or shelf.
This Corbel Mount System has light duty capacity only, so it is intended for decorative or modest support applications rather than heavy structural countertop or shelf loading.
The 1 x 4 Light Duty Corbel Mount System in galvanized finish pairs an L bracket and sleeve kit with a wood corbel, giving you a defined 4 x 2.5 size, light duty capacity, and 12 gauge bracket with 16 gauge sleeve for predictable mounting results.
