Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sento Floating Vanity Support Bracket provides balance and support strength with very little visibility, so vanities and counters appear to float while still being structurally supported. This floating vanity bracket is a black steel unit designed as a floating vanity bracket for base cabinets and countertops, aligning with typical bath layouts that need clear space below. The formed fabrication process gives the bracket the strength to hold both base cabinets and countertops, which helps support full-depth vanity runs under solid-surface or similar tops. The supporting arms are 18 inches long to support a 22 inch deep cabinet or countertop, so the arm length reaches close to the front edge for typical vanity depths. This floating vanity bracket is part of the Federal Brace Sento Series, tying into a hardware family used for wall hung vanity layouts. The black finish on the steel helps the bracket stay visually low profile under common countertop and cabinet shadows.
The Sento Floating Vanity Support can be hidden behind wall material or through the cabinet base for a wall hung vanity, giving two mounting approaches depending on whether the bracket is buried in the wall or run inside a cabinet. It can be hidden inside the cabinet or behind the fascia of the wall with only the support arms extending under the vanity for support, which keeps the structural steel out of sight while still letting the arms carry the cabinet and counter. If no cabinet is used, the counter can be secured to the arm extension, allowing a countertop-only floating sink or shelf layout while still using the same bracket body fixed to the stud wall. These options let installers plan either a framed cabinet vanity or an open floating counter while keeping visible metal to a minimum.
The Sento Floating Vanity Support Bracket is a floating vanity bracket designed to hold both base cabinets and countertops, so it fits wall hung vanity runs where the cabinet or top is supported from the wall instead of the floor. The supporting arms are 18 inches long to support a 22 inch deep cabinet or countertop, which suits many bathroom vanity depths where a typical 22 inch top is used over a cabinet or open frame. Vanity supports will comply with the Americans with Disabilities Act (ADA) when installed per the requirements of the Accessibility Guidelines, Section 606 Sinks, matching projects that need under-sink knee clearance without floor legs. The Sento Floating Vanity Support can be hidden behind wall material or through the cabinet base for a wall hung vanity, so it works in both new wall framing layouts and retrofits where the bracket runs through the cabinet interior.
The formed fabrication process gives the Sento floating vanity support the strength to hold both base cabinets and countertops, which helps maintain straight, level lines under load so tops sit flat and doors track correctly. Federal Brace recommends using a vanity support that extends within 4 inches of the front edge of the vanity, and pairing this with the 18 inch arms that support a 22 inch deep cabinet or countertop reduces overhang leverage that can otherwise stress fasteners in a point load situation. Maximum load carrying capacity on vanity support brackets is 200 lbs with 1/32 deflection, so within that load range the bracket limits deflection to a small amount that supports even seams and consistent reveal lines. The Sento Floating Vanity Support should be tied into the stud wall, which allows loads from base cabinets, countertops, or counters secured to the arm extension to be transferred into framing where the structure is designed to take weight.
The Sento Floating Vanity Support Bracket is used on floating or wall hung vanity runs where the bracket holds both base cabinets and countertops for bathrooms or similar sink layouts.
The Sento Floating Vanity Support has supporting arms that are 18 inches long to support a 22 inch deep cabinet or countertop, serving common bathroom vanity depths.
The vanity supports will comply with the Americans with Disabilities Act (ADA) when installed per the requirements of Accessibility Guidelines, Section 606 Sinks, supporting ADA sink clearances.
The vanity support brackets have a maximum load carrying capacity of 200 lbs with 1/32 deflection, providing a defined load range for planning cabinet and countertop weight.
The Sento Floating Vanity Support should be tied into the stud wall, so bracket forces from cabinets and countertops are transferred into structural framing members.
The Sento Floating Vanity Support can be hidden behind wall material or through the cabinet base, with only the support arms extending under the vanity or counter for support.
The Sento Floating Vanity Support Bracket by Federal Brace combines a formed fabrication process with 18 inch arms designed to support a 22 inch deep cabinet or countertop, aligning with wall hung vanity layouts. The bracket is intended to be tied into the stud wall and can be hidden behind wall material or within the cabinet base, with only the support arms visible under the vanity or counter. With a maximum load carrying capacity of 200 lbs with 1/32 deflection and ADA compliance when installed per Accessibility Guidelines Section 606 Sinks, this floating vanity bracket supports bathroom projects that need both visual clearance and documented performance.
