Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hammam Lavatory Support is a floating vanity bracket from Federal Brace designed to mount on the side of wooden wall studs with the support arm extending out and under a vanity or stone top, so the counter appears to float while being structurally backed. This black steel Hammam Series Floating Vanity Support measures 24 inches tall, 3/4 inch thick, and provides 20 inches of support under a lavatory counter, giving solid reach under typical vanity depths. The arm on the 24 inch Hammam is centered on the vertical, creating a balanced support layout that suits many standard sink heights. This vanity support system is part of the ADA and vanity bracket category, aligning it with projects that prioritize accessible lavatory layouts. Maximum load carrying capacity of 200 pounds with 1/32 inch deflection means the bracket is engineered for controlled flex under expected bathroom vanity loads.
This floating vanity bracket is designed to mount on the side of wooden wall studs, which lets installers align brackets directly to framing without secondary blocking noted in the description. The 24 inch Hammam places the support arm centered on the vertical, giving a consistent reference height when laying out multiple brackets along a lavatory run. Both available Hammam sizes provide 20 inches of support under a lavatory counter, so installers can plan for the same reach regardless of bracket height. The lavatory surface should not extend more than 4 inches past the end of the support, so overhang is limited to a defined distance for predictable leverage and loading. Federal Brace recommends using a vanity support that extends within 4 inches of the front edge of the vanity, which keeps the load path close to the front where point loads often occur during everyday use. Placing one bracket on every stud for the length of the lavatory counter ties the entire run back into the wall framing.
This floating vanity bracket is part of the ADA and vanity bracket category and is described as a lavatory support, so it targets bathroom sink and lavatory counter applications that benefit from open space below. The support system provides a floating or invisible surface configuration, allowing the counter to appear unsupported from the front, which suits contemporary restroom designs. Vanity supports in this series will comply with the Americans with Disabilities Act when installed per Accessibility Guidelines Section 606 Sinks, so they fit projects where ADA sink clearance and approach need to be addressed. The black finish option described for the Hammam line coordinates with darker hardware palettes and can visually recede under stone or solid-surface tops. With 20 inches of support extending under the lavatory counter, the bracket works where typical vanity depths are used and a defined support reach is required.
The Hammam Lavatory Support mounts on the side of wooden wall studs, which assigns each bracket a direct connection to framing and simplifies load paths for design calculations. Maximum load carrying capacity of 200 pounds with 1/32 inch deflection provides a specific performance limit, so designers and installers can match lavatory materials and spans to a known bracket capability. Federal Brace recommends using a vanity support that extends within 4 inches of the front edge of the vanity, guiding layout toward keeping the arm close to the front where users apply point loads. The lavatory surface should not extend more than 4 inches past the end of the support, setting a maximum overhang dimension that helps limit leverage on the bracket in a point load situation. Bracket placement on every stud for the length of the lavatory counter distributes loading along the wall, which supports longer runs without leaving unsupported gaps behind the surface.
The Hammam Lavatory Support is designed to mount on the side of wooden wall studs, so each bracket fastens directly to framing for structural support behind the lavatory.
This floating vanity bracket provides 20 inches of support under a lavatory counter, giving a defined supported depth for planning stone or other lavatory surfaces.
The lavatory surface should not extend more than 4 inches past the end of the support, which limits overhang and helps control leverage on the bracket.
The Hammam Lavatory Support has a maximum load carrying capacity of 200 pounds with 1/32 inch deflection, defining how much weight the bracket is designed to carry.
Vanity Supports in this series will comply with the Americans with Disabilities Act when installed per Accessibility Guidelines Section 606 Sinks, aligning with ADA-focused sink projects.
The Hammam Lavatory Support is described to be placed with one bracket on every stud for the length of the lavatory counter, distributing support along the entire run.
This Federal Brace Hammam Lavatory Support in black steel provides a floating vanity bracket that mounts to wooden wall studs and delivers 20 inches of under-counter support, making it suited to lavatory projects needing open space below. The 24 inch tall configuration with centered support arm offers a consistent geometry for setting bracket heights across a run. Defined limits on overhang and a rated 200 pound load capacity with 1/32 inch deflection give clear performance boundaries when pairing the bracket with stone or other lavatory surfaces. Choosing this ADA and vanity bracket category support aligns bathroom layouts with ADA-focused design when installed per Accessibility Guidelines Section 606 Sinks.
