Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Torrence Bench Support by Federal Brace is a steel angle bench bracket designed to carry seating off a structural mounting wall. It uses 3x3 angle iron to create a strong L-shaped support that holds a fixed bench or seat firmly in place. The bracket size of 21.5 x 15.5 x 3 positions the seat surface and down leg to work together under load, giving a defined geometry for repeat installations. A 21.5 inch deep mounting surface is engineered to carry a 25 to 28 inch deep seating area, so you can plan bench depth around a known support range. The bench support is rated for a 500 pound carry capacity per bracket, allowing it to handle substantial seating loads when spaced and fastened as described. Flat black electrostatic powder coat adds a rust-inhibiting finish, so the steel stays protected while providing a clean, uniform appearance.
The Torrence Bench Support is made from heavy gauge steel angle, so it presents flat faces for mounting to a structural wall and to the underside of a bench seat. The down leg is intended to be fastened into masonry or studs, which anchors each bracket into a solid substrate for reliable load transfer. Brackets should be spaced no more than 24 to 30 inches apart, creating a predictable support rhythm that distributes weight across the span. Three 0.26 inch straight holes on the top mount section provide defined points for fastening into the bench or seat structure. Two 0.50 inch straight holes on the down mount side provide larger anchor locations for fastening into the wall. This hole layout lets installers position anchors consistently, supporting a repeatable installation workflow on half walls or other structural mounting walls.
The Torrence Bench Support is designed to install into a half wall around a fire pit or any area with a structural mounting wall, so it suits fixed seating built off existing masonry or framed walls. The steel angle construction provides significant carrying capacity under a bench or seat, turning a vertical wall into a cantilevered seating base. Federal Brace specifies that the 21.5 inch deep mounting surface will support a 25 to 28 inch deep seating area, which makes the bracket a fit for standard bench depths around gathering spaces. Because the down leg is designed to be fastened into masonry or studs, it can work on properly framed stud walls or solid masonry features commonly found in outdoor and transitional spaces. The flat black finish helps the support blend under many bench materials while contributing a consistent visual line along the wall.
The Torrence Bench Support is produced from heavy gauge steel angle, so it resists flexing under load, which is important when people sit or shift weight along the bench. A carry capacity of 500 pounds per bracket means loads are handled by each support individually, allowing installers to calculate bench performance based on bracket count and spacing. The recommendation to space brackets no more than 24 to 30 inches apart ties directly to that capacity, distributing weight along the wall and reducing stress on any single point. Multiple flanges created by the angle construction increase surface contact and fastening options, giving the bench structure more bearing area where it meets the steel. The electrostatic powder coat process provides a durable rust inhibitor, reducing corrosion on the steel in typical bench environments. Flat black finish also offers an attractive, neutral appearance under wood or composite seating, which helps the structural hardware stay visually secondary to the finished bench.
The Torrence Bench Support has a 21.5 inch deep mounting surface that is designed to support a 25 to 28 inch deep seating area, so bench tops can be sized within that range.
The Torrence Bench Support has a carry capacity of 500 pounds per bracket, which allows substantial seating loads when spaced and fastened according to the described layout.
The Torrence Bench Support is ready to install into a half wall around a fire pit or any location that provides a structural mounting wall suitable for anchoring the bracket.
The Torrence Bench Support down leg should be fastened into masonry or studs through its two 0.50 inch straight holes, tying the bench load into solid wall structure.
The Torrence Bench Support top mount has three 0.26 inch straight holes, providing defined points to secure the bench or seat structure to the bracket.
The Torrence Bench Support is made from heavy gauge steel angle and coated with a flat black electrostatic powder coat that acts as a durable rust inhibitor.
The Torrence Bench Support by Federal Brace combines heavy gauge steel angle, a 500 pound carry capacity per bracket, and a 21.5 inch mounting surface sized for 25 to 28 inch seating depth. For projects built off half walls, masonry, or stud walls, this flat black bench bracket provides defined dimensions and hole layouts that streamline planning. Choose this support when a structural mounting wall is available and a fixed bench or seat needs predictable depth, spacing at 24 to 30 inches, and a powder coated steel bracket designed to serve as the primary load-carrying element under the seating surface.
