
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Mission Wood Corbel defines this Federal Brace piece as a corbel bar bracket built around simple horizontal and vertical lines with flat panels, so it suits clean, mission-style trim work on mantels, cabinets, and counters. The corbel is described as light duty and for decorative purposes, which means it is intended to add visual detail where structural support already exists. The material is solid maple, giving a hardwood body that stands up well to typical interior woodworking environments while matching other maple components. The finish is supplied as unfinished maple, allowing staining or painting on site so the corbel can blend into existing finishes or stand out as an accent. The back of the wood corbel has been routed and pre-fit with a light duty mount system for non weight bearing purposes, so it is prepared for decorative mounting from the factory.
The Mission Wood Corbel 6x3x14 is sized at 6 inches by 3 inches by 14 inches, giving a proportion suited to decorative use under mantels, cabinet overhangs, or counter aprons where visual balance matters more than load. The back face is routed and pre-fit with a light duty mount system designed for non weight bearing applications, so the mounting area is already shaped and configured to accept the provided fasteners in a predictable way. The corbel is supplied as unfinished solid maple, which lets installers integrate it into existing finishing workflows, whether that means staining to highlight the maple grain or painting for a unified color field across cabinets, mantels, or counters.
This decorative maple corbel is positioned for finished mantels, cabinets, and counters that already have structural support, because the listed carry capacity states it is for decorative use only and does not provide significant support. The 6 inch by 3 inch by 14 inch size gives a tall, relatively slender profile that visually fills space under shelves, mantels, and overhangs without acting as a primary bracket. The focus on simple horizontal and vertical lines with flat panels allows the piece to sit comfortably beneath straight-edged mantels, square cabinet ends, or rectilinear counter runs. Solid maple construction means the corbel aligns naturally with maple mantels, face frames, doors, or trim, supporting visually unified cabinet or fireplace layouts. The unfinished surface allows shops or installers to adapt the appearance to light, medium, or dark finishes so a single corbel pattern can serve multiple design schemes. Because the back is routed for the light duty mount system, the corbel nests neatly against the mounting surface in these decorative locations.
The statement that this wood corbel is for decorative use only and does not provide significant support sets a clear role, so it can be added confidently as a visual element on mantels, cabinets, and counters that rely on separate structural brackets. The routed and pre-fit back with a light duty mount system for non weight bearing purposes means the main joinery work is already handled in the factory, which helps produce consistent alignment and depth when installing multiples along a run. The 6 x 3 x 14 dimensioning establishes repeatable spacing and projection, useful when laying out several corbels under a long counter or mantel for even visual rhythm. Solid maple as the specified material provides a uniform substrate that responds predictably during sanding and finishing, supporting consistent stain or paint results across multiple pieces. The unfinished maple finish state allows the same corbel profile to be integrated into different projects, from natural maple mantels to painted cabinet runs, simply by adjusting the finishing step. Together, these defined attributes give installers and shops a clear understanding of how the corbel behaves as a decorative component in their assemblies.
The Mission Wood Corbel is described as 6 inches by 3 inches by 14 inches, providing a tall decorative profile suitable for use under mantels, cabinets, and counter overhangs where proportion and spacing matter.
The Mission Wood Corbel is listed for decorative use only and does not provide significant support, so it is used where mantels, cabinets, or counters already rely on other structural elements.
The corbel is made from solid maple, giving a hardwood body that works well in typical woodworking processes such as sanding, staining, or painting to coordinate with surrounding maple components.
The back of the wood corbel is routed and pre-fit with a light duty mount system for non weight bearing purposes, so the mounting face arrives shaped to accept the required fasteners.
This Mission Wood Corbel is supplied as unfinished solid maple, enabling staining or painting so its final appearance can align with the surrounding cabinets, mantels, or counters.
This light duty corbel is described for decorative purposes on finished mantels, cabinets, and counters that already have support, adding an artistic and decorative touch in those locations.
The Mission Wood Corbel 6x3x14 in unfinished solid maple from Federal Brace is defined as a light duty, decorative component for mantels, cabinets, and counters that already have support. With its simple horizontal and vertical lines, flat panels, and routed back pre-fit with a light duty mount system for non weight bearing purposes, it integrates cleanly into mission-influenced work. For projects needing a maple corbel that can be stained or painted to match existing woodwork while serving a clearly decorative role, this defined Mission Wood Corbel offers a straightforward option.