Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3 x 10 Lexington Overhang Wood Corbel defines this Federal Brace solid maple corbel as a light duty, non-weight bearing support, so it serves as a decorative element rather than structural support under counters, mantels, and cabinets. The Lexington Overhang Wood Corbel design provides equal support areas under the counter and down the cabinet, so the face of the corbel visually balances both surfaces in finished work. Being part of the corbels class in decorative hardware and moldings means this component is intended to finish exposed areas, so it helps transition between cabinet faces, countertop edges, and finished mantels. The carry capacity specified for decorative use only clarifies its role in projects, so it is used where primary support already exists and appearance is the priority.
The back of the wood corbel has been routed and pre-fit with the light duty mount system, so the mounting interface is already prepared and the installer works with a consistent back profile instead of shaping it on site. The corbel is supplied in unfinished maple, so it accepts wood stain or paint to match the surrounding cabinetry, mantels, or counters during finishing steps. Because the light duty mount system is built into the routed back, its role stays focused on holding a decorative, non-weight bearing element in place while the main structural supports handle loads.
The Lexington Overhang Wood Corbel by Federal Brace is described for decorative purposes on finished mantels, cabinets, and counters that already have support, so it works where structural brackets or supports are already carrying the load. The noted common applications around cabinets and counters position the corbel as a visible trim element, so it can be laid out under countertop edges or along mantel legs to create a consistent architectural rhythm. Its equal support areas under the counter and down the cabinet guide placement, so the upper portion aligns with the counter overhang while the lower portion drops along the cabinet face for a proportional look. As part of the decorative hardware and moldings corbels category, it fits into woodworking projects wherever a shaped wood support profile is desired purely for appearance rather than strength.
The Lexington Overhang Wood Corbel uses solid maple material, so sanding, profiling, and edge-tuning behave like other solid maple components and allow consistent finishing with matching stains or paints. The unfinished maple surface is intended to be finished with wood stain or paint to match the custom application, so finishing schedules can be aligned with existing cabinet or mantel finishing systems for a uniform appearance. The listed 10 x 3 x 10 size defines its height, thickness, and projection, so installers can plan layout spacing under counters and along cabinets to maintain clearances and even visual spacing across runs. With the back of the wood corbel routed and pre-fit with the light duty mount system, the mounting contact area is already established, so repeated installations follow the same interface and reduce layout variability from piece to piece. The note that this Lexington Overhang wood corbel is intended for light duty, non-weight bearing decorative use focuses its role, so designers and installers can standardize it as the decorative element while assigning structural responsibility to other support systems. For heavier duty applications, this corbel style is available with a corbel rib, so projects that later call for increased support can reference a related configuration while keeping a similar visual style.
The Lexington Overhang Wood Corbel is made from solid maple, so it works well wherever matching maple trim, cabinets, or mantels are used and needs finishing compatible with maple stock.
The 3 x 10 Lexington Overhang Wood Corbel is rated for decorative use only and does not provide significant support, so loads must be handled by other structural elements.
The Lexington maple corbel has a back that is routed and pre-fit with a light duty mount system, so the mounting interface is pre-formed for attaching the corbel as a decorative piece.
This Lexington corbel is commonly used decoratively on finished mantels, cabinets, and counters that already have support, so it visually enhances areas without acting as the main support.
The unfinished maple Lexington Overhang Wood Corbel is designed to be finished with wood stain or paint, so it can match surrounding cabinetry, mantels, or counter finishes.
The 10 x 3 x 10 dimensions identify the Lexington corbel size, so installers can plan projection from the counter edge, overall height, and thickness when laying out decorative support locations.
The Lexington Overhang Wood Corbel in solid unfinished maple combines a 10 x 3 x 10 profile with a routed, pre-fit light duty mount system, so it slots into mantel, cabinet, and counter projects as a decorative, non-weight bearing support with a consistent installation interface. For projects needing a similar look with heavier capacity, this corbel style is also available with a corbel rib, so selection can be based on the required support role while preserving a related appearance across the installation.
