Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8 x 12 corbel bar bracket describes a Federal Brace wood corbel sized 8 x 3 x 12 inches that works as a structural and decorative bar support, so it carries countertop or bar overhangs while adding a finished look to the installation. The solid maple construction means the bracket is cut from maple wood, which gives it the strength needed for bar or counter applications and a consistent surface for machining clean edges. An unfinished surface means the maple is supplied bare, so it can be stained or painted to match custom cabinetry, trim, or existing finishes on site. A routed back fitted with a heavy duty rib system adds engineered reinforcement along the mounting side, so the bracket can support rated loads under counters or range hoods without relying only on the wood mass. A carry capacity of 375 pounds indicates substantial load capability, so one bracket can handle significant weight when properly spaced along a bar run.
The wood corbel bar bracket uses a routed back fitted with a heavy duty rib system, which creates a defined mounting interface that nests against wall or cabinet surfaces to help align the bracket during installation. The 3 inch wide slim profile means the contact footprint is narrow, so the installer can place the support between cabinet elements or along tight fascia while still gaining support depth. The 8 inch and 12 inch legs establish clear reference dimensions under a bar or counter, so the mounting side and support side can be laid out predictably along framing or cabinet sides. The 375 pound carry capacity rating reflects the ribbed structure and solid maple material working together, so fewer brackets may be required along a run when compared to lower rated supports.
The wood corbel bar bracket by Federal Brace is designed for use under bars, where its simple, clean lines supply a decorative element beneath an overhang while still functioning as a structural support. The 8 x 3 x 12 inch size suits many bar and counter depths, so the longer leg can sit under the countertop while the shorter leg bears against vertical framing or cabinet gables. Its unfinished maple construction means it aligns well with maple cabinetry or other wood millwork, so the bracket can be finished to visually merge with doors, panels, and trim. The routed back with a heavy duty rib system tailors the bracket to applications under counters or range hoods, so it can serve as a visible support element in kitchen, bar, or cooktop areas that benefit from both structure and a finished look.
The 375 pound carry capacity establishes the corbel as a heavy duty bar support, so it can bear substantial live and dead loads from a countertop section when used within the overall design. The heavy duty rib system embedded in the routed back stiffens the bracket along its height and depth, so the load is carried more efficiently from the underside of the bar into the wall connection points. Because the corbel body is solid maple, the wood fibers work in combination with the rib reinforcement to resist bending or crushing under service loads, which supports long-term performance under repeated use. The 3 inch wide slim profile balances visual lightness with strength, so installers can keep a less bulky appearance under a bar while relying on the rated capacity produced by the ribbed structure and maple construction. The unfinished surface also matters in practice because it lets the finisher apply coatings after installation, so any cut edges or field adjustments can be sealed and colored at the same time as surrounding woodwork for a unified appearance.
The corbel bar bracket is sized at 8 x 3 x 12 inches, so installers can lay out support spacing and overhang coverage based on those leg lengths and slim profile.
The Federal Brace wood corbel is made from solid maple, which provides a dense, stable wood body for structural bar and counter support applications.
The 8 x 12 corbel bar bracket is unfinished maple, so it can be stained or painted to coordinate with cabinets, trim, or other wood surfaces on the project.
This wood corbel bar bracket has a carry capacity of 375 pounds, allowing it to support significant bar or countertop loads when spaced appropriately along the run.
The corbel bracket has a routed back fitted with a heavy duty rib system, which reinforces the mounting side and helps it handle the 375 pound carry capacity.
This wood corbel is used under bars, counters, and range hoods, where it provides both visible decorative support and structural carrying capacity.
The Federal Brace 8 x 12 corbel bar bracket combines a 375 pound carry capacity with a routed back and heavy duty rib system, giving solid support under bars, counters, and range hoods. Its solid maple, unfinished construction lets the bracket accept stain or paint so it can align with the project finish schedule. Order this wood corbel bar bracket from Wurth Baer Supply to match structural needs with a clean, contemporary decorative profile on your next bar or countertop installation.
