Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Relic 3D teak wood wall panel from Federal Brace is a textured wood wall panel designed as decorative wall cladding. The 3D surface creates visual depth on the wall, which helps transform flat wall runs into more dimensional feature areas. Each panel is made from teak wood, so the face shows natural grain and color variation that gives projects a warmer, more organic appearance compared to uniform synthetic surfaces. The rich tones of the teak wood are emphasized across the panel face, so installers see a mix of lighter shades through to a gorgeous, deep red that adds contrast across larger installations. With a 3/4 inch thick profile, the panel builds noticeable relief off the substrate, which supports a more pronounced 3D effect when light hits the wall.
The Federal Brace Relic 3D teak wood wall panels use a nominal 21.25 inch length, which helps simplify running horizontal or staggered patterns because each repeat measures a consistent span on the wall. The 7 inch height per panel defines course spacing, allowing quick calculation of how many rows are required for a given wall height. With a 0.75 inch thickness, the panels add depth without projecting excessively, which is useful when decorative cladding must stay within tighter overall wall build-ups. Because the panels function as textured wall cladding, they are suited to being applied over suitable substrates wherever a finished wood wall surface is required.
The Federal Brace Relic 3D teak wood wall panels are positioned for decorative hardware and moldings applications, so they integrate well into projects where trim, molding, and feature walls are specified together. As wood wall panels, they are geared toward interior wall cladding scenarios where a visible finished surface is needed rather than a structural panel. The 3D teak wood face provides a textured wall cladding solution, which is effective for turning plain wall areas into focal points in reception zones, residential living spaces, or similar project locations that benefit from visual impact. With each panel showing rich teak tones ranging from lighter to deep red, installed fields gain natural variation that suits projects aiming for a warm, wood-forward appearance.
The 21.25 inch by 7 inch by 0.75 inch panel size on the Relic 3D teak wood wall panels supports repeatable layout because every piece shares the same stated dimensions, so installers can plan patterns and joints around a stable module. The 3/4 inch thick profile adds a measurable step off the substrate, which enhances the 3D effect when multiple panels are installed in sequence and exposed to directional lighting. Because the product is a wood wall panel made from teak, each panel contributes authentic grain and tone, which helps projects achieve a consistent natural-wood look instead of a printed pattern repeating at short intervals. The textured wall cladding role of these panels also supports clean visual transitions where they meet complementary decorative hardware and moldings from the same general category.
The Relic 3D teak wood wall panel is stated at approximately 21.25 inches long, 7 inches high, and 0.75 inches thick, which defines its coverage area and the depth of the 3D relief on the wall.
The Federal Brace Relic 3D panels are made from teak wood, so the installed surface shows true wood grain and color variation rather than a printed or synthetic pattern.
The Relic 3D teak wood wall panels display rich tones from lighter shades to deep red, giving the finished wall a varied, warm appearance that helps break up large flat surfaces.
The Relic 3D teak wood wall panels fall under decorative hardware and moldings as wood panels, positioning them for projects that coordinate trim, molding, and feature wall surfaces.
The Relic 3D teak wood wall panel has a thickness of 0.75 inches, giving the installed wall a noticeable 3D profile without excessive projection into the room.
FB-07459 is the manufacturer part number for this Federal Brace Relic 3D teak wood wall panel, helping identify the exact panel style and size when specifying or reordering.
The Federal Brace Relic 3D teak wood wall panels combine a 21.25 inch by 7 inch by 0.75 inch format with textured teak wall cladding, giving projects dimensional relief and natural wood tone in one product. The rich teak colors, ranging from lighter shades to deep red, provide visual variety across installed fields without requiring multiple finishes. As wood wall panels in the decorative hardware and moldings category, they are suited to feature walls and similar applications where the wall surface is part of the design. Use the FB-07459 identification when planning, specifying, and sourcing panels for consistent results across the full project scope.
