Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Portico Marble bullnose is a laminate edge molding that finishes exposed laminate edges on countertops, islands, desks, and work stations in one continuous run, so the entire edge line reads as a single, coordinated surface. The 7735-58 Portico Marble matte finish matches Portico Marble laminate, which carries the look from the top surface down over the edge for a unified appearance on the finished installation. A bullnose profile on this IdealEdge molding rounds the front edge, which softens the transition for day-to-day contact and gives a smooth feel along the working edge. The molding height of 1-1/2 inches is designed to cover standard laminate build-ups, so the face edge and the core are concealed when the strip is properly aligned. A 12 foot, or 144 inch, length lets you run longer sections such as kitchen islands or work stations with a single piece, which reduces visible seams along the edge.
This Formica IdealEdge laminate edge molding is specified for straight, curved, clipped, and 90 degree edges, so one profile can be used to follow a range of plan shapes without switching to different edge types. That flexibility lets fabricators carry the same Portico Marble bullnose detail across inside corners, outside corners, and gentle curves for a consistent finished look. The moisture barrier MDF core under the laminate shell is designed to resist moisture intrusion at the core, which helps the edge hold up in normal countertop, island, or desk environments where spills or routine cleaning contact the front edge. Formica recommends AFF522 series glue, sold separately, for this edge molding, so adhesive selection can be matched to the laminate edge construction when planning shop or onsite work. Using the recommended glue series supports bond strength between the laminate edge and the substrate, which is important when this 12 foot molding is handling regular impact along busy work surfaces.
This Formica IdealEdge Portico Marble bullnose edge molding is specified for use on countertops, islands, desks, and work stations, so it is intended for horizontal surfaces that see regular contact and visual scrutiny. The 12 foot length works well for kitchen islands or long work stations where a single, uninterrupted edge line is preferred, which is common in office, institutional, or residential runs. Suitable use on straight edges means it can be run along standard rectangular counters, while suitability for curved edges lets the same molding be used on arcs or radius corners in reception or island designs. The ability to work on clipped edges supports angled terminations on peninsulas or corners, bringing the same Portico Marble 7735-58 finish onto design details that break the typical 90 degree layout. Specified performance on 90 degree edges means this bullnose can negotiate inside or outside right-angle corners, which is critical when wrapping L-shaped or U-shaped laminate layouts.
The 1-1/2 inch profile height on this bullnose molding supplies enough material to cover standard laminate build-ups at the front of countertops, which helps keep the substrate and core concealed for a clean, finished presentation at eye level. A moisture barrier MDF core under the decorative laminate layer is engineered to resist moisture reaching the core, and that design supports edge integrity where spills and cleaning fluids contact the front of counters, islands, or desks during normal use. The Portico Marble 7735-58 matte finish on the molding visually coordinates with matching laminate, helping installers deliver tops where the surface and edge read as a single design instead of a separate trim piece. Formica assigns manufacturer part number 077352058D12000 to this IdealEdge profile, which provides a reliable identifier when reordering the same edge style or matching it across multiple phases of a project. A 10 year limited warranty that covers delamination of the edge reflects the manufacturers confidence in the bond between laminate and core, which supports long-term service where the bullnose front edge sees frequent contact and routine cleaning over many years.
This product is a laminate edge molding from Formica IdealEdge, so it is designed to finish exposed laminate edges on countertops, islands, desks, and work stations with a coordinated decorative profile.
The Formica IdealEdge Portico Marble bullnose is 12 feet, or 144 inches, long, which allows many countertop, island, or desk runs to be edged with a single continuous molding piece.
This IdealEdge molding has a 1-1/2 inch profile height and a bullnose shape, giving coverage over typical laminate build-ups and a rounded front edge where users regularly contact the surface.
The Portico Marble IdealEdge molding is specified for use on countertops, islands, desks, and work stations, so it suits a range of horizontal surfaces in both work and living areas.
This Formica IdealEdge laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile to follow varied plan shapes across a project.
This IdealEdge bullnose uses a moisture barrier MDF core, and Formica recommends AFF522 series glue, sold separately, to bond the molding during fabrication or onsite work.
This Formica IdealEdge 7735-58 Portico Marble bullnose edge molding from Wurth Baer Supply combines a 1-1/2 inch profile, 12 foot length, and moisture barrier MDF core to support durable laminate edge finishing across countertops, islands, desks, and work stations. The coordinated Portico Marble matte finish and bullnose profile let the edge read as part of the surface design while softening daily contact along the front of the top. For projects built around Portico Marble laminate where a continuous, matched edge detail is important, this IdealEdge molding provides the specified profile and dimensions to carry that look from straight sections through curves and 90 degree corners.
Sold In: 1 Each