Salice Series CU Silentia hinge gives cabinet builders a concealed face frame hinge with integrated soft closing, so overlay doors close more gently while keeping a clean exterior look. This hinge belongs to the concealed cabinet hinge class, so the hardware stays hidden inside the case, which helps finished installations look consistent across a job. The 106 degree opening angle lets the door swing wide enough for everyday cabinet access, which supports normal residential and shop storage use. Nickel plated steel construction provides a hard-wearing surface on the hinge components, which supports long-term operation in typical woodworking environments. A 1-7/16 inch overlay designation in the description identifies this hinge for overlay door applications, so it serves projects designed around face frames rather than frameless construction. The manufacturer part CUR3DD9R uniquely tags this configuration, which matters when repeat orders must match earlier work.
The 11 mm, or 7/16 inch, cup depth shared across all hinges in this line defines the recess needed in the door, which supports consistent boring setups on drills or CNC equipment. A possible drilling distance on the door from 2.5 mm to 6.0 mm, or 3/32 inch to 1/4 inch, outlines the hinge cup position range from the edge, which affects how the overlay presents on the frame. This drilling distance window provides flexibility during layout, which is useful when aligning multiple doors on a face frame bank. The dowel reference in the description indicates a dowel style connection at the cup, which suits production methods that rely on dowel insertion into pre-bored holes in the door.
This hinge is described as an overlay face frame hinge, so it serves cabinets where doors overlay the face frame rather than sit flush inside an opening. On these builds, the 1-7/16 inch overlay description helps identify the overlay region this hinge is intended to support, which matters when matching the door size to the frame layout. The concealed cabinet hinge classification keeps the hardware inside the cabinet, which helps designers maintain a smooth exterior surface on face frame runs. A 106 degree opening angle allows doors on these cabinets to open widely enough for normal access to shelves, which supports typical storage and retrieval tasks without the door binding at a shallow angle. Nickel plated steel material gives the hinge a familiar metallic finish, which coordinates with other nickel finished cabinet hardware commonly specified in woodworking projects.
The integrated soft close mechanism built into this hinge moderates the closing motion of the door, which helps protect face frames and door edges from repeated impact. Because the Silentia 3 cam design lets users adjust in three directions, the hinge offers tuning for door position, which supports even gaps between adjacent doors and alignment with drawer fronts. The activation switch located on the front of the unit allows the soft close feature to be deactivated, so installers can change from damped to free-swing motion without changing hinges, which is helpful when one opening on a bank needs different behavior. The possible drilling distance range from 2.5 mm to 6.0 mm gives flexibility when setting up boring patterns, which supports aligning overlays on frames that vary slightly due to material or machining tolerances. Dowel style mounting at the cup suits cabinet shops that rely on dowel insertion into clean, repeatable bores, which can streamline production when building multiple overlay doors using the same hinge specification.
The Salice Series CU Silentia hinge is a concealed overlay face frame hinge, so it is used on cabinets with face frames where the door overlays the frame.
The hinge provides a 106 degree opening, which allows the cabinet door to swing wide enough for typical access to shelves and stored items.
The Silentia 3 cam adjustment on the hinge offers three adjustment points, which helps fine-tune door position so reveals and margins can be aligned across cabinets.
The hinge has an 11 mm, or 7/16 inch, cup depth, which defines the recess depth to bore in the door for proper seating of the hinge cup.
The Salice Series CU Silentia hinge supports a possible drilling distance on the door from 2.5 mm to 6.0 mm, or 3/32 inch to 1/4 inch, affecting overlay positioning.
The hinge has an integrated soft close mechanism that can be deactivated using the activation switch on the front of the unit when free-swinging motion is preferred.
The Salice Series CU Silentia hinge with 1-7/16 inch overlay, soft close mechanism, and 3 cam adjustment gives cabinet projects a concealed overlay face frame solution with tuning built in, so overlay doors can be aligned while managing closing behavior on each opening. Choosing the CUR3DD9R part keeps ordering tied to a specific 106 degree, 11 mm cup depth, dowel mount hinge, which supports consistent hardware across repeat jobs.
Sold In: 1 Each