Sea Grass edgebanding 1mm gives you a defined Sea Grass edge in a controlled 1mm thickness, so cabinet and furniture edges finish with a consistent profile from part to part. The 15/16 inch width covers typical panel thickness with a bit of working margin, helping you trim flush without exposing the core. The 600 FT length is suited to production or larger jobs, so long runs on cabinets, casework, or shelving use the same color and thickness. As an ABS edgebanding in a Sea Grass tone, it supports color-coordinated work where the edge needs to match a Sea Grass design. The edge banding format fits straight-edged substrate work, letting you apply a Sea Grass edge where the panel face requires that look.
The 1mm thickness on this ABS edgebanding defines how much material you have to flush-trim, which supports repeatable setups on trimming equipment. With a 15/16 inch width, you gain enough overhang past common panel thickness to allow precise trimming passes without cutting into the panel face. The 600 FT length keeps one continuous specification across many parts, so your setup for thickness and trimming stays stable from the first piece to the last on the job.
This Sea Grass ABS edgebanding in 1mm thickness fits projects that call for an ABS edge in a Sea Grass tone along exposed panel edges. The 15/16 inch width makes it suitable for edging panels where that width can cover the panel edge with trimming allowance. With 600 FT available under the manufacturer part number 315428-053, it suits runs where the same Sea Grass edge must repeat across multiple cabinets or furniture components. The edge banding form supports work on straight-edged panels in casework, shelving, or similar assemblies that need a coordinated Sea Grass edge presentation.
The 1mm thickness gives a defined material layer at the edge, which supports consistent trimming results when your tooling is set for that thickness. Because the width is 15/16 inch, there is material beyond typical panel thickness that can be trimmed away systematically, helping maintain a clean seam between the Sea Grass edge and the panel face. The 600 FT length keeps you on the same ABS Sea Grass specification for many parts, so each finished edge shares the same color and thickness characteristics. Using a defined manufacturer part number, 315428-053, helps reference this exact Sea Grass ABS edgebanding when matching to existing work or planning repeat jobs where the same edge appearance is required.
The Sea Grass ABS edgebanding is 1mm thick, which sets a predictable trimming depth and supports consistent edge profiles across cabinet or furniture parts.
The ABS edgebanding is 15/16 inch wide, giving coverage over common panel thicknesses with room to trim the Sea Grass edge cleanly to the panel.
This Sea Grass ABS edgebanding is supplied in a 600 FT length, supporting extended runs so multiple pieces share the same edge color and thickness.
The Sea Grass edge banding is ABS, giving you an ABS edge layer that aligns with applications calling for ABS edgebanding rather than other plastics.
The 1mm thickness defines a consistent material layer at the edge, so trimming equipment can be set for that thickness and used across the job.
Manufacturer part number 315428-053 identifies this specific Sea Grass ABS edgebanding in 1mm thickness, 15/16 inch width, and 600 FT length for repeat ordering and matching.
This Sea Grass edgebanding 1mm from Rehau, Inc. provides a defined ABS edge in 1mm thickness, 15/16 inch width, and 600 FT length. That combination supports consistent trimming setups and extended Sea Grass edge runs. When a project calls for a Sea Grass ABS edge across multiple cabinets or furniture pieces, this specific 315428-053 edgebanding keeps color, thickness, and width aligned so your finished edges present as a unified Sea Grass detail.
Sold In: 1 Roll