Perfect Beige edgebanding 1mm gives cabinet and furniture edges a matching finished look, so raw board edges do not stand out in the final project. This Rehau, Inc. edge banding uses an ABS material identified in the SAP description, which provides a consistent synthetic surface along the edge. The 1mm thickness adds a defined edge profile compared to thinner tapes, which helps the edge present as a solid, uniform band once trimmed and flushed. The 15/16 inch width is sized to cover common panel thicknesses in many shop layouts, so the banding can fully cover the face and slight overhang for trimming. The continuous 600 FT length on a roll supports longer production runs or multiple projects without frequent changeovers, which helps keep edge-banding workflow steady in the shop.
This Perfect Beige Edgebanding 1mm Thick, 15/16 inch Width x 600 FT is sized to cover panel edges with a controlled overhang that can be trimmed back. The 15/16 inch width gives a margin beyond many common board thicknesses, so the installer can allow slight excess on both faces and trim it flush. The 1mm thickness creates an edge that can be shaped and smoothed while still holding a defined profile, which is valuable when the edge is a visible line in cabinetry or furniture assemblies. Over a 600 FT length, the roll supports repetitive setups where the same thickness and width need to be maintained from piece to piece.
This Perfect Beige edgebanding 1mm is part of the Edge Banding product class, so it is intended for covering exposed edges on panels in woodworking and related projects. The ABS material named in the SAP description provides a uniform synthetic edge surface that visually ties into Perfect Beige finishes, which matters where the edge passes across doors, drawer fronts, or casework ends. The 15/16 inch width gives coverage for many cabinet-grade sheet goods, so the edge banding can be applied along both vertical and horizontal edges in a run. With 600 FT available, the same color, thickness, and width can be used across a full room of cabinetry or a sequence of furniture builds without changing materials midstream.
The 1mm thickness on this Rehau Perfect Beige edge banding supports a more pronounced edge detail than ultra-thin material, which helps the finished edge look intentional rather than just covered. That thickness allows light easing or shaping of the edge while still holding the Perfect Beige color consistently along the corner. The 15/16 inch measurement in the SAP description sets how far the banding extends across the panel edge, so there is enough material to trim both faces cleanly without exposing substrate. Over the 600 FT roll length, installers can run long cabinet lines or multiple identical jobs with the same 315428-089 part number, which supports consistent color and dimension from piece to piece. Because the product is identified as Edgebanding & Surfacing | Edgebanding, PVC in the category, it slots naturally into existing edge-banding workflows where ABS and similar materials are used for panel finishing.
This Perfect Beige edgebanding is identified as ABS in the SAP description, which gives a synthetic edge surface that stays consistent along cabinet and furniture panel edges.
The Rehau Perfect Beige edge banding is 1mm thick, providing a defined edge profile that can be trimmed and lightly shaped while still presenting a solid, continuous band.
The 15/16 inch width covers common panel edges with extra margin, allowing slight overhang on each face that can be trimmed back to a clean, flush edge line.
This Perfect Beige edgebanding 1mm roll has a length of 600 FT, supporting extended cabinet or furniture runs where the same color and size are needed repeatedly.
The manufacturer part number is 315428-089, which ties directly to this Perfect Beige Edgebanding 1mm Thick, 15/16 inch Width x 600 FT for consistent future orders.
This product is classified under Edgebanding & Surfacing | Edgebanding, PVC and the Edge Banding product class, which helps organize it in shop stock and order systems.
This Perfect Beige edgebanding 1mm pairs a 1mm thickness with a 15/16 inch width and 600 FT length, giving shops a repeatable edge solution for panel work. The Rehau, Inc. identity and 315428-089 part number connect the color and dimensions to a defined product, which supports consistent specification on drawings and job notes. For projects that call for Perfect Beige edges across multiple cabinets or furniture pieces, this roll offers the same ABS material, color identity, width, and thickness from the first edge to the last.
Sold In: 1 Roll