Designer White Edgebanding, ABS 1mm Thick, 15/16” Width x 600 FT

Designer White Edgebanding For Clean Finished Edges

Designer White edgebanding from Rehau, Inc. is ABS edge banding designed to cover and protect exposed panel edges, so cabinet and furniture projects present a consistent finished look. The 1mm thickness provides a substantial edge profile, supporting a solid feel at shelf and cabinet fronts. The 15/16 inch width is sized to cover common panel thicknesses with a bit of overhang for trimming, which supports clean, straight final edges. The ABS material gives a uniform surface for bonding against panel cores, helping installers produce an even glue line. Supplied in a 600 ft length, this edgebanding supports longer production runs or multiple jobs from a single roll, which reduces changeovers during fabrication. The Designer White color ties in with matching white panel surfaces, so visible transitions at the edge are minimized on finished work.

Key Details That Support Edge Finishing Work

• The 1mm ABS construction creates a defined edge profile, which helps panels resist chipping at high-contact fronts while giving installers material thickness to trim and flush to the surface.
• The 15/16 inch width is set to cover typical panel thickness with slight excess, allowing clean routing or trimming passes that bring the edge band perfectly flush with both faces.
• The 600 ft roll length supports extended runs of cabinet or furniture components, so shops can band many linear feet of edges in one color without mid-job material changes.
• The Designer White color coordinates with white panel faces, which helps keep edge lines visually consistent across doors, drawer fronts, and casework parts on the same project.
• The product class as edge banding defines its role in sealing and finishing raw substrate edges, which keeps panel cores out of view on exposed cabinet and furniture components.

Installation Fit For Common Panel Edge Banding

The 15/16 inch width on this ABS edgebanding gives coverage beyond standard panel thickness, which supports precise trimming along both faces after bonding. The 1mm thickness provides enough material for typical edge-banding equipment to grab, heat, and press into place along the substrate. As edge banding, it is intended for application to exposed edges of panel products so those edges transition smoothly into the main surface. The 600 ft length allows setups on edgebanding stations that can run many parts before reloading, which supports steady workflow on repetitive cabinet or furniture components finished in Designer White.

Using This ABS Edgebanding In Cabinet Shops

Where This Designer White Edgebanding Fits Best

This Designer White edgebanding from Rehau, Inc. is positioned for use on cabinet, furniture, and casework components that call for a white finished edge to match surrounding surfaces. As an edge banding product in the Edgebanding & Surfacing category, it is suited to covering raw panel edges so projects present a unified appearance from face to edge. The 15/16 inch width lets it span the full thickness of common panels used in cabinetry, with extra width that is taken down during trimming. Because the roll supplies 600 ft of material, it supports production environments where many cabinet parts or shelves are processed in the same Designer White finish.

Details That Support Consistent Edge-Banding Results

The ABS 1mm construction gives this edge banding a stable profile while it is run through edgebanding equipment, which supports even pressure along the glue line as it is applied. The defined thickness helps trimming tools locate a consistent reference as blades or bits bring the band flush with panel faces, reducing variation from part to part. The 15/16 inch width provides controlled overhang, so installers can run a uniform trim pass instead of managing narrow coverage at the edge. The Designer White color alignment with white panel faces helps reduce visible contrast at joints, so slight variations at the transition are less noticeable on finished cabinetry. With a 600 ft roll, shops can maintain the same material across large orders, which supports consistent appearance over many cabinets, doors, and shelves.

Common Questions About This Rehau ABS Edgebanding

Select This Designer White Banding For Matching Edges

This Designer White edgebanding from Rehau, Inc. pairs a 1mm ABS thickness with a 15/16 inch width and a 600 ft length to support panel edge finishing in a matching white tone. For cabinet, furniture, or casework runs using white-faced panels, this edge banding provides the dimensions and material profile needed to cover exposed edges and trim them flush. When a project calls for consistent Designer White edges across many parts, this roll offers the length and format to support that work.