Nautical Edgebanding 1mm Thick gives you a defined, matching edge on board projects where a coordinated Nautical look is required. The 1mm thick ABS material creates a substantial edge profile that holds its line along cabinet or furniture runs. The 15/16 inch width covers standard panel edges with room to trim for a flush, finished edge. The 600 FT length supports longer production runs or multiple jobs from a single roll, helping keep color consistent across all exposed edges. The ABS construction keeps the product in the PVC edgebanding category, aligning with common shop materials and standard edge banding workflows. Branded by Rehau, Inc., this edge banding ties directly to their surfacing systems for projects calling out Rehau Nautical finishes.
The 15/16 inch width of this Nautical Edgebanding 1mm Thick gives coverage beyond common panel thickness, allowing installers to apply and then trim back to a precise edge. The 1mm thick profile provides enough material for clean trimming passes along the face and back without feeling fragile at the edge. Because the product is in the Edgebanding, PVC category with ABS described, it fits into standard edge banding machines and hand-application workflows built around PVC and ABS banding. The 600 FT length supports uninterrupted edging of multiple cabinet runs or larger furniture assemblies, so fit and appearance remain consistent from the first piece to the last.
Nautical Edgebanding 1mm Thick, 15/16 inch Width x 600 FT is suited to projects that specify a Nautical color edge to coordinate with matching surfacing. The edge banding belongs to the Edgebanding & Surfacing category, so it is intended to finish exposed board edges in woodworking applications. On cabinet runs or furniture casework, the 1mm thickness gives the edge profile presence that pairs well with modern surfacing materials. The 15/16 inch width gives coverage for edges on common sheet goods while still trimming back cleanly for reveal-free corners. With 600 FT available on a single roll, the product can carry through complete room layouts or multi-piece furniture sets while holding the same Nautical appearance on every edge.
The ABS construction in this edge banding, noted in the SAP description as 15/16X1MM NAUTICAL ABS 600FT, places the product within familiar ABS and PVC edge banding workflows, which supports consistent handling from job to job. The 1mm thick profile leaves enough material at the perimeter for accurate trimming passes, helping installers create straight, chip-free edges that match the face material. The 15/16 inch width gives some overhang on typical panels, so alignment during application is more forgiving while still allowing a tight final edge once trimmed. The extended 600 FT roll length reduces changeovers during edge banding runs, which supports uniform results on large cabinet banks or multiple Nautical-finished components. The Rehau, Inc. branding and specific manufacturer part number 315428-088 give a clear reference point for reordering the same Nautical ABS banding when repeat work or field repairs call for an exact material match.
The Nautical Edgebanding 1mm Thick roll is 15/16 inch in width and 600 FT in length, which supports edging multiple panels or extended cabinet runs with the same material.
The Rehau Nautical edgebanding has a 1mm thickness, giving the edge enough material for solid trimming passes and a defined profile along cabinet or furniture edges.
This product is described as Nautical ABS in the SAP description and is listed in the Edgebanding, PVC category, placing it in the ABS edge banding family for typical shop workflows.
The 15/16 inch width provides coverage past common panel thickness, allowing installers to apply the strip and then trim back to a flush, clean edge line.
The 315428-088 manufacturer part number identifies this specific Rehau Nautical Edgebanding 1mm Thick, 15/16 inch Width x 600 FT product for ordering and matching jobs.
The 600 FT length allows edge banding of many components or long cabinet runs from one roll, which supports consistent Nautical color and appearance across larger projects.
Nautical Edgebanding 1mm Thick, 15/16 inch Width x 600 FT from Rehau, Inc. gives you a defined ABS edge solution for projects calling out a Nautical finish. The combination of 1mm thickness, 15/16 inch width, and 600 FT roll length supports both one-off builds and repeat runs with the same material specification. Using the manufacturer part number 315428-088 ties your project directly to this exact edge banding, helping keep future work or replacements aligned to the original specification. Add this Nautical ABS edge banding to projects where a coordinated edge and surfacing appearance are part of the job requirement.
Sold In: 1 Roll