Shale edgebanding 1mm thick defines this Rehau, Inc. edge banding as a dedicated solution for covering raw panel edges in cabinet and furniture work, giving a consistent finished edge where cut substrate would otherwise remain exposed. The 15/16 inch width matches typical 3/4 inch panels with a small overhang, allowing trimming back to a flush line so the face and edge present as one plane. The ABS material identified in the SAP description as "SHALE ABS" provides a plastic working surface that pairs with common shop edgebanding trimmers, helping installers process long runs efficiently. The shale color tone described in both the product name and web description supports projects where a shale-style finish is required, so visible edges stay aligned with the chosen design. A 600 FT length provides a continuous run for multiple cabinets or casework sections, reducing splice points along the edge.
The 15/16 inch width noted in the product name provides enough overhang on 3/4 inch panels so installers can set the edgebanding accurately, then trim back for a straight, flush finish without chasing a short edge. The 1mm thickness described in the web and product descriptions creates an edge that handles common trimming and scraping tools without feeling flimsy during processing. The identification of the product as ABS in the SAP description means the edge banding works within established ABS-processing workflows, from application through final clean-up, supporting predictable handling on cabinet or furniture lines. The continuous 600 FT length gives room to run long gables, tops, and multiple fronts from one coil, helping maintain consistent edge appearance from cabinet to cabinet.
The classification under Edgebanding & Surfacing and Edgebanding, PVC defines this Rehau, Inc. product as part of a surfacing system for finishing exposed panel edges in cabinet, furniture, or casework construction. The 15/16 inch by 1mm sizing stated in the product and web descriptions fits workflows that start with 3/4 inch engineered panels, giving a repeatable margin for trimming on straight runs and vertical edges. The "Shale" designation in the product name, web description, and SAP description marks the banding as a color-specific option, so projects built around a shale-related finish can extend that look across doors, drawer fronts, and exposed ends. The 600 FT length described for this edge banding suits production where multiple cabinets, shelves, or partitions are processed in sequence, keeping color and material consistent across all visible edges.
The 1mm thickness documented in both the product name and description contributes to a defined edge that stands up well during trimming and light edge finishing, helping maintain a straight visual line where doors and fronts align. The ABS material identified in the SAP description as "SHALE ABS" supports machining, trimming, and light scraping in standard ABS edgebanding processes, which is important when aiming for repeatable joints and corners. The 15/16 inch width gives a practical amount of overhang, so even with slight placement variation, the final trimmed edge still covers the substrate cleanly without thin spots. The manufacturer part number 315428-064 ties this specific shale color, ABS material, and 1mm by 15/16 inch size together, helping shops repeat exact matches on future orders and keep repairs or add-on cabinets visually in line with existing work. The defined category of Edgebanding, PVC combined with ABS in the SAP description positions this product within the broader plastic edgebanding family, supporting standardized handling alongside other similar edge materials in the shop.
This Rehau, Inc. edge banding is 15/16 inch wide and 1mm thick over a 600 FT length, giving coverage and overhang suited to edging 3/4 inch panels across multiple pieces.
The SAP description lists this product as "SHALE ABS," indicating an ABS edge banding that works within typical ABS machining and trimming processes for cabinet and furniture production.
The 15/16 inch width gives slight overhang beyond a 3/4 inch panel, so installers can apply the band proud and then trim it back to obtain a flush, uniform edge line.
The 1mm thickness provides a more substantial edge than very thin tape, supporting a defined profile at doors and fronts while remaining manageable for trimming equipment.
The shale designation in the product name and description identifies the color tone, allowing edges to align visually with shale-style surfaces used on cabinets or panels.
The manufacturer part number 315428-064 uniquely identifies this 15/16 inch by 1mm shale ABS 600 FT roll, helping shops reorder the same color and size for consistent results.
This Rehau, Inc. shale edgebanding pairs a 15/16 inch width, 1mm thickness, and shale color designation to support clean, coordinated panel edges on cabinet and furniture work. The ABS material and 600 FT length described in the SAP and web descriptions align with production-focused edging workflows, from straight cabinet runs to matching add-on pieces. When a project calls for a shale-toned edge in an ABS format sized for 3/4 inch panels, this 315428-064 edge banding provides a defined specification that can be repeated across current and future jobs.
Sold In: 1 Roll