Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Slate Grey Edgebanding 2mm gives you a PVC edge treatment sized for typical surfacing panels, so raw edges can be covered with a consistent Slate Grey finish that visually ties into matching laminated or surfaced components. The 15/16 inch width works with common cabinet and furniture panels, giving you enough coverage to trim flush without exposing substrate. At 2mm thick, this edge banding provides a more substantial edge profile than thin tape, which helps create a solid, finished look on cabinet cases, shelves, or work surfaces. The 400 FT length supports longer production runs or multiple jobs, reducing mid-project changeovers on the bench. As a PVC edge banding from Rehau, Inc., this material fits into standard edgebanding workflows in the woodworking shop, supporting repeatable processing on typical equipment.
This Slate Grey Edgebanding 2mm from Rehau, Inc. combines 2mm thickness with a 15/16 inch width, so the material seats well on typical cabinet or furniture panel edges with enough overhang for trimming operations. Classified as PVC edge banding, it is suited to standard edgebanding and surfacing workflows that rely on consistent thickness for machine settings. The 400 FT roll length reduces stops to change material during edging runs, which keeps equipment dialed in for longer stretches on the same setup. With these dimensions and class, this Slate Grey PVC edging supports straightforward installation in a professional woodworking environment.
As an Edge Banding product in the Edgebanding & Surfacing category, this Slate Grey Edgebanding 2mm is intended for finishing exposed panel edges in cabinet, furniture, and general woodworking applications that use surfacing materials. The Slate Grey color aligns visually with Slate Grey surfaces, allowing vertical panels, shelves, and fronts to carry the same tone from face to edge for a unified appearance. The 15/16 inch width supports use on commonly specified panel thicknesses, giving just enough overage for trimming without excessive waste. With 400 FT available on a roll, shops can edge a full kitchen, bank of casework, or a series of fixtures while staying on one consistent Slate Grey material, which supports visual continuity across multiple units.
The 2mm thickness on this Slate Grey PVC edgebanding establishes a predictable edge dimension, which allows edgebanding machinery to be set once and run multiple parts with consistent pressure and trimming performance. That thickness also adds a more substantial visual edge, which many shops use to signal a higher-end surfacing treatment compared with very thin tape. The 15/16 inch width gives a working margin beyond typical panel thickness, so alignment during application is more forgiving while still trimming back to a tight, flush edge. The 400 FT roll length reduces the frequency of changes on the edgebander, helping keep cut, band, and trim operations running in a steady rhythm. Identified by manufacturer part number 301233-137 from Rehau, Inc., this specific Slate Grey Edgebanding 2mm can be referenced consistently in shop paperwork and project specifications to repeat the same color and dimension on future jobs.
This Slate Grey Edgebanding 2mm is a PVC Edge Banding product, so it works within standard edgebanding and surfacing processes used in woodworking shops handling PVC materials.
The Rehau, Inc. Slate Grey Edgebanding is 2mm thick, providing a substantial edge profile that supports consistent machine settings and a more pronounced finished edge on cabinets and panels.
This PVC edge banding has a 15/16 inch width, giving coverage across standard panel edges with extra material for trimming to a clean, flush finish after bonding.
The Slate Grey Edgebanding 2mm roll length is 400 FT, supporting longer production runs and allowing multiple cabinets or furniture pieces to be edged from the same continuous material.
This Slate Grey PVC edging is manufactured by Rehau, Inc., a brand identified on the product listing, which helps shops specify the same material across projects.
The manufacturer part number is 301233-137, giving installers and purchasers a precise reference for reordering the same Slate Grey Edgebanding 2mm product.
This Slate Grey Edgebanding 2mm Thick, 15/16 inch Width x 400 FT from Rehau, Inc. aligns panel edges with Slate Grey surfacing while supporting standard PVC edgebanding workflows. The combination of 2mm thickness, 15/16 inch width, and 400 FT length gives professional installers and serious DIY users a consistent, project-ready edging solution when Slate Grey panels or components are being finished.
Sold In: 1 Roll