Fog edgebanding 1.2mm identifies this material as a dedicated edge banding designed to finish exposed board edges in a fog color tone, so cabinet and furniture projects gain a consistent, finished perimeter. The 1.2mm thick construction provides a substantial edge layer, which supports a solid visual transition from surface to edge on panels. The 15/16 inch width covers typical board thicknesses used in many woodworking builds, giving room for slight overhang and trimming while still fully hiding the core. The 600 FT length per roll keeps long runs and multiple units on a job using the same edge material, which supports uniform appearance across doors, drawer fronts, and panels. This product is part of the Edgebanding & Surfacing category, so it fits naturally into workflows where matching edges to flat surfaces is central to the finished result.
This fog edge banding has a 1.2mm thickness, so installation methods can be planned around a moderately thick edge layer that trims cleanly and leaves enough material for a smooth radius or flush edge. With a 15/16 inch width, installers have margin on each side of common panel thicknesses, which supports accurate trimming passes without exposing the core. The 600 FT roll format is suited to production environments, where continuous edging on cabinet parts or case components benefits from fewer material changes. As an Edgebanding & Surfacing product within the PVC category, it works into established edge banding stations and processes that are already set up for PVC materials.
This fog edge banding is classified as Edge Banding, so it is targeted at covering and finishing raw panel edges in cabinetry, furniture, and casework. The 15/16 inch width aligns with edging needs on panels near three-quarters of an inch thick, giving enough coverage for both faces during trimming passes. With a total length of 600 FT, one roll can serve multiple rooms of cabinetry or a run of store fixtures, allowing the same fog color to carry through all exposed edges. Being placed in the Edgebanding & Surfacing category signals that it works alongside matching surfacing materials in coordinated projects where edge and face appearance need to align.
The 1.2mm thickness of this fog edge banding gives fabricators enough material to sand or scrape lightly after trimming, helping them achieve a refined transition between face and edge without cutting through to the core. The 15/16 inch width provides tolerance for slight panel size variations while still ending with a fully covered edge, which reduces rework due to exposed substrate lines. This item is listed as 15/16X1.2MM FOG ABS LASER 600FT, so buyers can match that description and the 315592-064 manufacturer part number directly to job specifications or shop records. The PVC edgebanding classification groups it with commonly used edge materials in woodworking, which simplifies planning when a fog-colored band is required in a consistent material family.
This fog edgebanding is 1.2mm thick and 15/16 inch wide, which supports full coverage of common panel edges while leaving enough material for trimming and finishing.
The fog edge banding is supplied in a 600 FT length, allowing extended edging runs on multiple cabinet or furniture parts using the same material.
This product is listed in the Edgebanding & Surfacing category under PVC, placing it within a familiar group of edge materials used in woodworking shops.
The 315592-064 manufacturer part number identifies this specific 15/16X1.2MM FOG ABS LASER 600FT edge banding for ordering and matching to project documents.
The 1.2mm thickness provides a moderate edge layer that supports trimming and light post-processing while maintaining a solid-looking edge on panels.
The 15/16 inch width offers coverage across typical panel thicknesses, leaving slight overhang for trimming while fully concealing the board edge.
This fog edge banding combines a 1.2mm thickness with a 15/16 inch width and a 600 FT roll length, giving shops a defined edge layer, coverage for standard panels, and enough material for extended runs. With its classification as Edge Banding in the Edgebanding & Surfacing PVC category, it fits directly into established edging workflows where a fog tone is specified. Selecting this 315592-064 part number keeps edge color, thickness, and width aligned across cabinets, furniture, or casework projects that call for this specific fog band.
Sold In: 1 Roll