Overcast edgebanding 1mm gives you a dedicated edge banding solution in a 1mm thickness, so you can cover raw panel edges with a consistent, finished look that matches the Overcast tone from piece to piece. The 15/16 inch width provides coverage across standard panel edges with a bit of working margin, which helps during trimming and keeps minor alignment shifts from exposing the core. The ABS material described in the SAP information defines the plastic base you are working with, so you can plan your edge processing around a uniform thermoplastic rather than mixed materials. Supplied in a 600 foot length, this roll format supports longer runs or multiple cabinet jobs from one product, reducing mid-project roll changes and keeping the setup focused on continuous work. Branded by Rehau, Inc., the edge banding aligns with a recognized manufacturer in the edge banding category.
The 1mm thickness of this Overcast edge banding defines how it sits on the panel edge, giving you a solid layer to mill flush after bonding rather than a film that disappears under trimming pressure. The 15/16 inch width works across common panel thicknesses, leaving enough overhang at the face and back to trim cleanly without chasing a perfect initial alignment. Because it is categorized as edgebanding and surfacing in the PVC edge banding class, it fits directly into standard edge banding workflows where you are applying a plastic band to a raw panel edge and finishing it to the face.
This Overcast edgebanding 1mm, in a 15/16 inch width, is set up for covering exposed panel edges in cabinet and furniture builds where you want a defined plastic edge. The width aligns well with typical sheet goods, giving you a controlled amount of overhang to trim on both faces while still centering easily on the edge. Because the SAP description identifies it as ABS, you are working with a single thermoplastic type across the entire 600 foot roll, which helps keep cutting, trimming, and scraping behavior predictable across every part. The Rehau, Inc. branding connects the product to a dedicated edge banding manufacturer, supporting shops that standardize on edge materials by brand and need repeatable performance on different jobs.
The 1mm thickness provides enough material to handle light sanding and scraping during finishing without cutting through to the substrate, which supports cleaner edges across multiple processing steps. That same thickness gives the banding a defined corner once trimmed, which is important when you are aligning doors and drawer fronts and want the edges to read consistently across a run of parts. The 15/16 inch width lets you compensate for small panel size variations at the edge while still trimming back to a straight line along the faces, which reduces rework when working from large cut lists. With 600 feet on a single roll, a shop can edge a series of carcasses or fronts in the Overcast tone from one continuous source, which supports color and sheen consistency across an entire installation that uses this specific Overcast edge detail.
The edgebanding is identified as ABS in the SAP description, so you are working with a single ABS plastic base for cutting, trimming, and finishing workflows.
The edgebanding is 1mm thick, providing a defined layer on the panel edge that supports flush trimming, scraping, and light sanding without cutting through immediately.
The 15/16 inch width covers common panel edges with extra margin on both faces, allowing trim-back to a clean line even if initial alignment shifts slightly.
The 600 foot length supports longer production runs or multiple projects using the same Overcast edge, limiting roll changes during cabinet or furniture jobs.
The number 315428-056 is the manufacturer part identifier for this specific 15/16x1mm Overcast ABS edgebanding, which ties directly to the Rehau product.
The product is classified as edge banding under edgebanding and surfacing, so it is intended for covering and finishing raw panel edges in woodworking applications.
This Overcast edgebanding 1mm, at 15/16 inch width and 600 foot length, ties thickness, width, and run length into one consistent ABS edge solution for Overcast projects. For shops organizing work around specific colors and materials, this Rehau edge banding gives a defined option whenever a 1mm ABS Overcast edge is required across cabinet boxes or fronts. Selecting this part number 315428-056 connects the job directly to this Overcast 15/16x1mm ABS edge banding, aligning material, color tone, and format for continuous edge work.
Sold In: 1 Roll