Denim Edgebanding 1mm Thick gives you a defined denim-tone edge that finishes raw board sides and creates a consistent band around your panels. The 1mm thick profile adds a noticeable edge detail that helps protect substrate edges in everyday cabinet use. The 15/16 inch width covers standard panel thickness with a little margin, which supports tight trimming without exposing the core. The 600 FT length is sized for production or multi-job runs, reducing changeovers during a full day at the edgebander. This product is described as ABS in the SAP description and listed under Edgebanding, PVC in the category, so it is positioned within plastic-based edge solutions commonly used in cabinet and furniture work. The Rehau, Inc. brand association links this roll to a recognized edge banding manufacturer that focuses on edgebanding and surfacing materials.
The 1mm Thick profile on this Denim Edgebanding 1mm Thick gives installers a defined material thickness for machining, which works well when setting trimmers and flush bits. The 15/16 inch Width provides enough coverage across the panel edge so operators can run a light trim pass on both faces without cutting back to the substrate. The 600 FT length on a single roll helps maintain consistency over many parts in one setup, which is useful when feeding an edgebander for cabinet runs or a series of shelving components. Being categorized under Edgebanding & Surfacing and Edge Banding positions this product for standard edge application workflows in cabinet and woodworking shops.
This Denim Edgebanding 1mm Thick, 15/16 inch Width x 600 FT is suited to finishing exposed board edges on cabinets, furniture, and similar panel-based work. The 15/16 inch width spans common panel thicknesses used in casework, giving fabricators room to center the strip along the edge before trimming. With 600 FT on a roll, a shop can run multiple cabinets, shelves, or furniture components in the same denim tone without mid-job material changes, which helps keep edge color and texture consistent across a full installation. The edge banding is listed as Edge Banding within Edgebanding & Surfacing, which places it in the core materials group that shops turn to for covering raw edges on laminated or engineered panels.
The manufacturer identification as Rehau, Inc. and the specific Manufacturer Part # 315428-061 provide a traceable reference when planning repeat projects. Using the same Denim Edgebanding 1mm Thick part number across different jobs helps align replacements or expansions to an existing install so new edges visually match earlier work. The SAP description of 15/16X1MM DENIM ABS 600FT confirms the dimensions and color designation in a concise format, which aids in ordering and shop documentation. Having a single part rolled into a 600 FT length also supports batching panel runs, where operators can process many pieces in sequence without swapping rolls, helping maintain steady throughput on edgebanding equipment.
The clearly defined 1mm Thick construction of Denim Edgebanding 1mm Thick gives edgebander operators a reliable thickness for heat, pressure, and trimming setups, which contributes to repeatable joints and smooth transitions from face to edge. At 15/16 inch Width, the material presents a predictable amount of overhang on standard panel edges, so trimming stations can be tuned once and used across a full batch with consistent results. The 600 FT length reduces the frequency of roll changes on the machine, which limits interruptions that can introduce alignment shifts between parts or lots.
The product is positioned by Wurth Baer Supply under Edgebanding & Surfacing with a Web Description that matches the stated dimensions, reinforcing that this Denim Edgebanding 1mm Thick is intended as a primary edge treatment material. The ABS reference in the SAP description and the PVC category listing together confirm that the material is part of the plastic edgebanding family commonly run on dedicated edge banders, which aligns with standard woodworking industry workflows. Using the specific Rehau 315428-061 designation in project documentation supports clear communication between the shop floor and purchasing when this same denim finish edge is required again.
Denim Edgebanding 1mm Thick is specified at 1mm thickness, 15/16 inch width, and 600 FT length, which defines how much edge you can cover and how it fits typical panel edges.
The 1mm thick profile on Denim Edgebanding 1mm Thick provides a more substantial edge than very thin tape, which supports cleaner trimming and a defined edge appearance on cabinets and panels.
The 15/16 inch width on Denim Edgebanding 1mm Thick spans standard panel thickness with extra margin, allowing light trim passes on both faces without exposing the underlying substrate.
The 600 FT length on Denim Edgebanding 1mm Thick supports longer production runs, so shops can process many parts in one setup while keeping the denim edge appearance consistent.
This Denim Edgebanding 1mm Thick is associated with Rehau, Inc., giving shops a defined manufacturer reference for sourcing the same denim edge material again.
The part number 315428-061 identifies this exact Denim Edgebanding 1mm Thick, 15/16 inch Width x 600 FT roll, which helps match future orders to the same color and dimensions.
Denim Edgebanding 1mm Thick, 15/16 inch Width x 600 FT brings together a 1mm thick profile, 15/16 inch coverage, and a denim tone suited to edge finishing on panel-based projects. The defined dimensions, ABS and PVC category references, and Rehau 315428-061 identification give shops clear, repeatable specifications when planning cabinet or furniture runs that call for a denim-colored plastic edgeband. For projects where a consistent denim edge line and documented dimensions matter across many parts, this edge banding provides a single part number that ties source, color description, and roll length together for straightforward selection.
Sold In: 1 Roll