Kodiak edgebanding 1mm gives you a PVC edge banding solution sized for standard panel work, using a 1mm thickness to cover raw edges and present a finished edge that looks intentional on cabinetry and furniture-grade panels. The 15/16 inch width matches typical 3/4 inch panel thickness with overhang to trim, so you can work quickly while still dialing in a clean final edge on site or in the shop. The 600 FT length is geared to production or multi-job use, helping one roll carry you through longer runs without frequent roll changes. The PVC construction provides a uniform edge material around the panel perimeter, which supports consistent trimming and routing passes across a project.
The 1mm thickness on this Kodiak edgebanding responds well to common edge-banding trimmers and routers, giving you a defined shoulder to work against during flush trimming. The 15/16 inch width is sized so that when applied to a 3/4 inch substrate, you retain enough overhang to clean up minor alignment variation while still finishing flush. With 600 FT on a roll, setups for cabinet runs, commercial casework, or multiple small jobs can stay consistent, since the same material feeds through your applicator and trimming stations over a long sequence of panels.
This Kodiak edgebanding 1mm from Rehau, Inc. is positioned for woodworking applications where PVC edge banding is specified, such as cabinetry, casework, and other panel-based assemblies. The classification as Edge Banding within the Edgebanding & Surfacing category makes it suitable for covering exposed panel edges wherever a PVC edge finish is desired on straight panel runs. The 15/16 inch width pairs naturally with common 3/4 inch engineered wood or laminate-topped substrates, supporting use on cabinet sides, shelves, tops, and bottoms that need a consistent front edge. Because the roll carries 600 FT, it suits both shop production runs and installers handling multiple rooms or units in a single material series.
The 1mm thickness on the Kodiak PVC edgebanding provides a balance between a substantial edge and efficient material use, giving enough material to resist edge chipping during trimming operations while still running efficiently through standard edgebanding equipment. The 15/16 inch width gives working latitude during application, so the installer can focus on adhesion and alignment knowing that trimming tools will bring the edge down flush to the panel face. Being PVC, the material presents a uniform density along the roll, so cutter settings and feed speeds can remain stable, which helps reduce the need for mid-run adjustments. The 600 FT roll length also means that once equipment is dialed in for this specific Kodiak profile, the same setup can carry through large cabinet banks or series work, supporting repeatable, consistent edge appearance from unit to unit.
Kodiak edgebanding 1mm is a PVC Edge Banding product from Rehau, Inc., used to cover raw panel edges so cabinetry and other panel constructions present a finished perimeter.
The Rehau Kodiak edgebanding on this roll has a 15/16 inch width, giving installers margin over 3/4 inch panels for alignment and final trimming to a flush edge.
This Kodiak PVC edgebanding is 1mm thick, providing a defined edge that works well with typical edge trimmers and routers for a clean, solid-looking finished panel edge.
The Kodiak edgebanding 600 FT roll provides 600 feet of PVC edge banding, supporting extended cabinet or casework runs without frequent material changes during production.
This Kodiak edgebanding 1mm product is manufactured by Rehau, Inc., and is listed under manufacturer part number 301799-134 for identification in ordering and inventory.
This product is classified as Edge Banding within the Edgebanding & Surfacing category, helping shops source it specifically for PVC edge finishing tasks on panel projects.
This Kodiak edgebanding 1mm, with its 15/16 inch width and 600 FT length, gives shops and installers a defined PVC edge banding option sized for common panel thicknesses and longer runs. The Rehau, Inc. manufacturer identity and part number 301799-134 keep ordering and reordering straightforward when you want to repeat a look. For projects that call for PVC Edge Banding in the Edgebanding & Surfacing class, this roll aligns dimensions, material, and run length for efficient edge finishing on cabinetry and other panel-based work.
Sold In: 1 Roll