Meringa edgebanding 1mm thick gives cabinet and furniture projects a defined Meringa-colored edge that matches the surfacing design, so visible substrate edges are covered for a finished look across runs. The 23mm width matches wider panel edges, so installers can center the band on the edge and still have material to trim on both sides after bonding. The 1mm thickness adds a noticeable edge profile compared with thinner tapes, which helps build a defined transition between faces and edges without feeling bulky in the hand. Made as ABS edgebanding, it supports projects where ABS material is specified as the edge solution in the shop. The 328 FT length is suited to longer production runs or multiple cabinets, so one coil can serve several related pieces before changing to another color or dimension.
The 23mm width is sized to cover typical board thicknesses used in casework and furniture, so installers can run the band slightly proud and then trim it back for a flush result. With a 1mm thickness, this Meringa edgebanding gives the edge enough substance to hold a clean line after trimming and light machining. The ABS construction keeps the product in the ABS edgebanding family, which matters when a shop is standardizing on ABS for its edging program. With 328 FT on the coil, long straight edges or repeated cabinet parts can be processed from the same run, helping maintain color continuity throughout a project.
This Meringa edgebanding 1mm thick, 23mm wide x 328 FT is positioned for cabinet and furniture edges where the design calls for the Meringa look from face through edge. The 23mm width lets shops cover the edge of case sides, doors, and drawer fronts that fall within common panel thickness ranges while still leaving material for trimming flush. Using an ABS edgebanding keeps the edge material in the same general class as other ABS-based components on the job, which simplifies material selection when planning a coordinated program. For projects repeating this specific color, the Meringa designation and 324696-018 part number give a clear reference that can be reordered for add-on pieces or replacement parts matching earlier work.
The 1mm thickness on this ABS edge banding Meringa profile offers an edge that can stand up to trimming operations without feeling overly sharp, so the final edge line appears intentional rather than visually thin. Because the coil supplies 328 FT of material, operators can run many parts back-to-back from a single color and size, helping keep shade and surface character consistent from unit to unit. The Rehau, Inc. branding on this edgebanding ties the product to an established edgebanding and surfacing supplier, which helps shops align this item with other Rehau materials in their program. The defined dimensions of 23mm width and 1mm thickness mean set-up for edge machinery can be repeated each time this 324696-018 edge banding is pulled, supporting predictable results across multiple jobs using the same specification.
The Meringa edgebanding measures 23mm in width and 1mm in thickness, which supports coverage of common panel edges with enough material for trimming to a flush finish.
The coil length is 328 FT, allowing extended cabinet or furniture edge runs to be processed from the same color and size for consistent visual results across pieces.
This 23mm edge banding is ABS edgebanding, placing it in the ABS material family for projects that specify ABS edges to coordinate with other ABS-based components.
The Meringa edgebanding 1mm thick is produced by Rehau, Inc., positioning it within the Rehau edgebanding and surfacing range used in many woodworking shops.
The 1mm thickness gives the edge a defined profile that can be trimmed and lightly machined, creating a deliberate transition between the panel face and the Meringa-colored edge.
Part number 324696-018 identifies this specific Meringa ABS edgebanding in 23mm width, 1mm thickness, and 328 FT length, helping shops reorder the same specification for repeat work.
This Meringa edgebanding 1mm thick, 23mm width x 328 FT from Rehau, Inc. aligns with projects that specify the Meringa tone in an ABS edge solution. The defined dimensions and coil length support repeatable shop settings and longer production runs using the same material. For cabinet or furniture work that needs this exact Meringa ABS profile, selecting this 324696-018 edge banding lets you match the specified color and size across new pieces and add-on jobs.
Sold In: 1 Roll