Midnight Dash edgebanding gives you a dedicated edge finish for furniture and cabinet panels using the Midnight Dash design, so visible panel edges match the chosen surface pattern for a consistent appearance on the job. The 1mm thick construction provides a defined edge profile, which helps create a substantial feel at doors, drawer fronts, and work surfaces where edges are handled regularly. With a 23mm width, this edge banding covers common board thicknesses while allowing a small trimming margin, supporting a tight, flush edge after machining. The continuous 328 FT length supports longer production runs or multiple smaller projects from a single roll, which helps simplify material planning across a shop. As an edge banding from Rehau, Inc. in the Edge Banding category, it is suited to typical woodworking and cabinetmaking workflows where an applied edge is required.
The 23mm width on this Midnight Dash edgebanding gives fabricators coverage for common sheet-good thicknesses used in cabinets and furniture, while leaving enough overhang for trimming operations. The 1mm thickness produces an edge that can be flushed and lightly profiled, so installers can dial in the final edge feel at touch points. The defined width and thickness help shops standardize machine settings for repeated passes, which supports consistent results from part to part. With 328 FT available on a roll, production teams can set up once and run a series of parts using the same setup, reducing interruptions during edging and finishing workflows.
This Midnight Dash edgebanding is intended for use on exposed edges of panels where the Midnight Dash pattern is specified, so cabinet cases, doors, drawer fronts, and shelving present a unified look. The 23mm width suits typical panel dimensions used in residential and commercial cabinetry, allowing one size to cover a range of parts in a project. Because the roll provides 328 FT of material, it supports multi-room or multi-unit work that shares the same finish scheme, which helps maintain continuity between separate cabinets or installations. As an edge banding product from Rehau, Inc., it aligns with common woodworking shop practices for applying a decorative and protective edge to board materials.
The 1mm thick design of this Midnight Dash edgebanding offers enough material at the edge for precise trimming and light shaping, which helps create a smooth transition between the face and edge without feeling too sharp. The 23mm width provides room to position the tape accurately along the panel while still leaving excess for final trimming, supporting clean results even when parts vary slightly in thickness. With a 328 FT roll, shops can run edge work on multiple cabinets, fronts, and shelves from the same lot, reducing pattern variation across components that sit side by side. The defined product identity as Midnight Dash Edgebanding 1mm Thick, 23mm Width x 328 FT simplifies reordering, so future replacement fronts or added cabinets can use the same edging and visually match existing work.
Midnight Dash Edgebanding 1mm Thick, 23mm Width x 328 FT provides a 1mm edge profile, 23mm coverage across the panel edge, and 328 feet of material for longer or repeat projects.
The Midnight Dash edgebanding is produced by Rehau, Inc., so it fits into professional edge banding and surfacing lines commonly used in woodworking and cabinet shops.
The 1mm thick construction gives enough material for trimming and light profiling, which helps create a substantial, smooth edge where cabinet doors, fronts, and shelves are handled.
The 23mm width covers common board thicknesses with extra for trimming, supporting flush, clean edges without exposing core material after routing or filing operations.
The 328 FT roll length supports edging multiple cabinets or larger runs of panels with the same Midnight Dash pattern, promoting visual consistency across a complete installation.
This product is identified as Midnight Dash Edgebanding 1mm Thick, 23mm Width x 328 FT with manufacturer part number 962091-080, helping shops match the same edge on future work.
Midnight Dash edgebanding 1mm Thick, 23mm Width x 328 FT gives shops a defined size and pattern for finishing exposed panel edges that use the Midnight Dash design. The 1mm thickness, 23mm coverage, and 328 FT length support efficient edging on cabinets, furniture, and shelving where a coordinated surface and edge appearance is required. Ordering this Rehau, Inc. edge banding from Wurth Baer Supply ties your projects to a specific, repeatable Midnight Dash edge that can be used across current and future work.
Sold In: 1 Roll