
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Noir Olive Detour Edgebanding gives you a 1mm thick, 23mm wide ABS strip that covers raw panel edges for a finished look on casework and fixtures. The 1mm thickness provides a solid edge profile that stands up to typical shop handling and normal cabinet use while preserving a consistent visual line along the workpiece. The 23mm width suits panel edges that need a bit of overhang for trimming, helping you dial in tight, flush results at the bench or on site. The Noir Olive Detour color tone lets you carry this edge treatment across projects that call for that specific look, so doors, drawer fronts, and carcass edges present a unified appearance. Supplied in a 328 ft length, the roll format supports longer runs of cabinetry or multiple smaller jobs without frequent changeover.
The 23mm width on this Noir Olive Detour Edgebanding gives you extra coverage beyond common board thicknesses, so you can apply, trim, and flush the edge without exposing the substrate. Its 1mm thick ABS profile offers enough material to take a clean cut with standard edge trimmers, supporting crisp corners and transitions between faces. Because it is supplied as a continuous 328 ft roll, you can run long cabinet sides, tall doors, or repeated shelving without splicing short pieces, which supports uniform joints along an entire elevation. The defined Noir Olive Detour color helps you line up edges with matching surfaces during layout, reducing visual breaks where panels meet.
This Noir Olive Detour Edgebanding from Rehau, Inc. is a PVC category edge banding built for covering exposed panel edges in woodworking and cabinet projects that call for that specific Noir Olive Detour tone. With its 23mm width, it suits applications where panels, doors, or drawer fronts need a finished edge with enough overhang to flush-trim cleanly after bonding. The 1mm thick ABS strip gives carcass edges, shelving, and face elements a defined profile that blends into the surface while still reading as a solid, purposeful edge. The 328 ft roll length supports production environments or repeat builds using the same Noir Olive Detour design, from residential cabinetry to commercial fixtures using matching surfacing. The manufacturer part number 962091-114 identifies this exact color and size combination for projects that specify Noir Olive Detour in drawings or cut lists.
The 1mm thickness of this Noir Olive Detour Edgebanding provides a stable edge that handles trimming without chatter, which helps keep seams tight along door and panel edges. Its 23mm width creates a margin that allows edgebanding equipment or hand tools to register reliably, so finished edges track straight over the length of cabinet sides and tall panels. The ABS material in this strip works within the Edgebanding & Surfacing category, supporting common edge-banding workflows used in woodworking shops and on job sites. Because the roll carries 328 ft of material, a single roll can cover many linear feet of panel edge, limiting color variation across a job that specifies the Noir Olive Detour shade. The clearly marked manufacturer part number 962091-114 allows installers, shops, and purchasers to reorder the exact same edgebanding when expanding an existing Noir Olive Detour installation or matching replacement fronts.
Noir Olive Detour Edgebanding is 1mm thick, giving a substantial edge that trims cleanly and provides a solid profile on cabinet doors, drawers, and casework panels.
The Rehau 962091-114 edgebanding is 23mm wide, offering extra coverage for panel edges so you can trim back to a precise, flush finish on various board thicknesses.
Each roll provides 328 ft of Noir Olive Detour Edgebanding, allowing longer cabinet runs or multiple smaller projects to use the same color and profile.
This product is listed under Edgebanding & Surfacing in the Edgebanding, PVC class, aligning it with typical edge treatment materials used in woodworking.
The 23mm ABS edge banding in Noir Olive Detour is from Rehau, Inc., providing a clearly identified source for specifications and repeat orders.
The manufacturer part number 962091-114 uniquely identifies this Noir Olive Detour, 1mm thick, 23mm wide, 328 ft edgebanding, simplifying ordering and project documentation.
This Noir Olive Detour Edgebanding from Rehau, Inc. ties together 1mm thickness, 23mm width, and a 328 ft roll length so you can edge panels, doors, and drawer fronts in a consistent Noir Olive Detour tone. The ABS construction and PVC category classification align with standard woodworking edge banding workflows. Selecting this exact 962091-114 edgebanding lets shops and installers match specified Noir Olive Detour designs across new builds or extensions of existing work. Put this roll to work when a defined Noir Olive Detour edge is part of the project requirements.
Sold In: 1 Roll