Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Brentwood Cherry edgebanding from Rehau, Inc. is PVC edge banding designed to cover and protect exposed panel edges while matching a Brentwood Cherry look. The .018mm thick PVC construction creates a slim, uniform edge that ties into laminate or melamine cherry tones for a consistent run of cabinets or casework. The 15/16 inch width is sized to cover standard 3/4 inch panels with overhang for trimming, helping installers finish plywood or composite substrates with a clean line. The 600 FT length in a single roll supports longer production runs and repeat projects using the same Brentwood Cherry finish, reducing changeovers. As an edge banding product in the Edgebanding & Surfacing category, it is suited to woodworking and cabinet work where exposed edges need color-coordinated coverage and a defined profile.
The 15/16 inch width on this Brentwood Cherry PVC edge banding gives extra coverage beyond typical 3/4 inch board thickness, so the band overhangs slightly for trimming and results in flush, square edges. The .018mm thickness keeps the edge banding slim, which helps it sit close to the panel surface and reduces the step that trimming tools remove along the length. With a 600 FT continuous roll, shops can set up an edgebanding station once and run many cabinet parts in sequence, which supports consistent feed settings and repeatable edge quality on doors, sides, and shelves.
This Brentwood Cherry edgebanding is classified as Edge Banding in the Edgebanding & Surfacing category, so it is oriented toward woodworking and cabinet production where panel edges are exposed. The Brentwood Cherry finish coordinates with projects calling for that specific cherry tone, supporting cohesive color across cabinet boxes, shelving, and fronts using matching surfaces. Because the banding is PVC, it is suited to edge treatment on engineered wood panels commonly used in casework, helping cover raw substrate edges in kitchens, offices, and other built-in installations that specify this decor. The 600 FT roll format supports shops that cut and process many parts with the same Brentwood Cherry design in a single production batch.
The .018mm thickness on this Rehau PVC edge banding sets a thin profile along every edge, which helps trimming tools remove minimal material while leaving a tight seam to the panel face. That thin edge reduces the visual step between surface and banding, supporting a more continuous look on doors and cabinet ends. The 15/16 inch width provides a controlled amount of overhang on standard 3/4 inch panels, giving enough margin for both faces to be trimmed cleanly without risking exposed core. This combination of width and thickness helps installers work at normal feed speeds while holding a clean, repeatable cut line. The 600 FT roll length keeps a single color and thickness running for many parts, which is useful when a job calls for multiple cabinets, tall panels, or shelving in the same Brentwood Cherry finish, because the entire run can draw from the same roll.
This Brentwood Cherry material is PVC edge banding classified under Edgebanding & Surfacing, so it covers and finishes exposed panel edges in cabinet and woodworking projects.
The Rehau Brentwood Cherry PVC edgebanding is 15/16 inch wide, giving margin beyond 3/4 inch panels so edges can be trimmed flush on both sides after bonding.
This Brentwood Cherry edgebanding is .018mm thick, providing a thin edge profile that supports tight seams to the panel surface and efficient trimming passes in typical shop setups.
The Brentwood Cherry edge banding roll length is 600 FT, which supports larger cabinet or casework runs using the same finish without frequent roll changes.
This Brentwood Cherry PVC edgeband is manufactured by Rehau, Inc., a producer identified with edge banding products used in woodworking and cabinet applications.
The 301674-933 identifier is the manufacturer part number for this specific Brentwood Cherry .018mm thick, 15/16 inch width, 600 FT PVC edge banding configuration.
This Brentwood Cherry Edgebanding .018mm Thick, 15/16 Width x 600 FT from Rehau, Inc. gives shops a defined combination of color, width, thickness, and roll length for cherry-toned projects. For cabinet and woodworking runs built around a Brentwood Cherry appearance, this PVC edge banding supports matching exposed panel edges to the chosen decor while maintaining a trim-friendly profile. Adding this specific 301674-933 roll to your material lineup aligns ongoing work with a repeatable Brentwood Cherry edge solution.
Sold In: 1 Roll