Desert Glow edgebanding is a PVC edge banding from Rehau, Inc. that covers and finishes raw panel edges, so cabinet, furniture, or fixture projects present a uniform Desert Glow surface from face to edge. The 1mm thick construction provides a substantial edge profile that can be machined, trimmed, and flushed to the panel for a clean transition, which helps reduce visible step lines at the edge. The 15/16 inch width gives coverage across standard panel thicknesses with a bit of overhang for trimming, which supports a neater finished line on both faces. The 600 FT length is suited to production runs or larger installations, reducing roll changes on repetitive edge work.
The 1mm thick Desert Glow edgebanding works as a robust PVC layer on the edge, so after bonding and trimming, the edge can align smoothly with the panel faces while maintaining a defined profile. The 15/16 inch width gives coverage beyond the panel faces, allowing installers to trim both sides back to flush, which supports straight lines and helps avoid exposed core at the corners. Because this is a PVC edge banding from Rehau, Inc., it is suited to standard PVC edgebanding application methods used in woodworking shops, allowing it to integrate into existing edge-processing steps.
This Desert Glow edgebanding is classified under Edgebanding & Surfacing as Edge Banding, so it is intended for covering exposed edges on panels used in cabinets, furniture, and similar woodworking assemblies. The 15/16 inch width supports edging on panels where both faces will remain visible, such as cabinet doors, shelves, or end panels, because the width allows trimming to a clean line on both sides. With a length of 600 FT, the product serves well in shop environments producing multiple identical components, since a single roll can be run across many parts before changing material, helping maintain consistent Desert Glow color from part to part.
The 1mm thickness of this Desert Glow edge banding provides a consistent material layer that responds predictably during trimming and flushing, supporting repeatable results on long runs of similar parts. Because the material is PVC, it behaves uniformly across the 600 FT roll, which helps maintain the same edge profile and feel from the first piece to the last. The 15/16 inch width also gives a repeatable amount of overhang on each side of a typical panel, allowing standard trimming settings to be used from part to part for efficient processing. Identified by manufacturer part number 301799-096, this specific Desert Glow edgebanding can be reordered for future jobs to match earlier work, supporting visual continuity across projects over time.
Desert Glow edgebanding on this product is 1mm thick, 15/16 inch wide, and supplied in a 600 FT length, which suits larger edging runs on cabinetry or furniture components.
Desert Glow edgebanding in this product is PVC, so it is suited to standard PVC edge banding application and trimming processes used in woodworking shops.
The 1mm thick Desert Glow edgebanding creates a noticeable yet manageable edge layer that trims cleanly, helping the finished edge align smoothly with the panel faces.
The 15/16 inch width on this PVC edge banding gives coverage past both panel faces, so installers can trim back to a straight, flush edge on each side.
The 600 FT length of Desert Glow edge banding supports continuous edging on many parts in one run, which suits production environments with repeated Desert Glow components.
The 301799-096 designation is the manufacturer part number for this 1mm thick, 15/16 inch wide, 600 FT Desert Glow PVC edgebanding, which helps match or reorder the exact product.
The Desert Glow edgebanding from Rehau, Inc. combines PVC construction, 1mm thickness, 15/16 inch width, and a 600 FT length to support consistent edging results across cabinets or furniture projects. For work requiring a Desert Glow finish from panel face to edge, this edge banding provides the color, dimensions, and run length needed to carry that look through every exposed edge on the job.
Sold In: 1 Roll