Bronzed Matte Steel Edgebanding gives cabinet and furniture edges a bronzed matte steel look, so exposed board edges visually match surrounding surfaces on the finished job. This Rehau, Inc. PVC edge banding is .018mm thick, which provides a thin edge treatment suited to precise millwork where a slim profile is important. The 15/16 inch width covers common panel thicknesses with a bit of tolerance, helping installers fully cover the edge without leaving a reveal. The 600 FT length in a single run supports longer production work or multiple installations from one continuous roll, reducing changeovers during cutting and application. The bronzed matte steel appearance supports projects that call for a steel tone with a subdued, low-glare look, aligning the edge with similar decorative surfaces in the shop or on site.
This Rehau, Inc. edge banding uses PVC material, so it behaves as a PVC trim during cutting, handling, and bonding steps. The .018mm thickness means the banding forms a thin layer at the edge, which can influence heat and pressure settings on edge-banding equipment or handheld application tools in the shop. With a 15/16 inch width, installers have margin beyond the finished panel dimension, allowing after-trimming of overhang with edge trimmers or routers to reach a flush edge. The 600 FT length allows long continuous pieces to be cut from the roll, which can reduce seams on extended runs such as tall pantry sides or long shelving edges.
This bronzed matte steel edgebanding is categorized as PVC edge banding, placing it in the edgebanding and surfacing group used across cabinet, furniture, and general woodworking projects. The bronzed matte steel appearance suits installations where surrounding surfaces or design elements call for a bronzed steel tone, so the edge follows the same visual concept. With its 15/16 inch width, this banding fits work that uses comparable panel thicknesses, giving fabricators the extra width they expect for trimming operations. The 600 FT roll length supports shops that want a single product for multiple cabinets or rooms finished in the same bronzed matte steel look, helping maintain color and finish continuity from part to part. Because it is PVC, this edge banding aligns with many PVC-based decorative panels used in casework and fixtures.
The .018mm thickness of this Rehau, Inc. PVC edge banding helps produce a slim edge that meets the face of the panel with a low-profile transition, which is useful when consistent reveals and clean lines matter across a bank of cabinets. The 15/16 inch width gives some overhang when applied to matching panel thicknesses, supporting standard trimming routines that leave a precise, square edge without exposed substrate. A 600 FT length means installers and production shops can cut repeat lengths for doors, drawer fronts, and shelves from the same coil, which supports consistent color and texture from one component to the next. The bronzed matte steel finish works as a visual continuation of a bronzed matte steel surface, helping align door and panel edges with the chosen decorative theme. The manufacturer part number 716041-612 identifies this exact combination of bronzed matte steel color, PVC material, 15/16 inch width, .018mm thickness, and 600 FT length for repeat orders.
This bronzed matte steel edgebanding is made from PVC, so it matches PVC edgebanding workflows during cutting and bonding and aligns with many PVC-based decorative board materials.
The Bronzed Matte Steel Edgebanding has a 15/16 inch width, providing coverage across common panel thicknesses with extra material for trimming to a flush edge.
This Rehau PVC edge banding is .018mm thick, creating a thin edge profile that supports precise, low-build edge transitions on cabinet and furniture components.
The 716041-612 edgebanding roll is 600 FT long, allowing multiple cabinets or extended runs to be cut from a single continuous coil.
The bronzed matte steel finish gives edges a bronzed steel look with a matte appearance, aligning edge color and tone with bronzed steel-style surfaces.
This product is classified as edge banding in the edgebanding and surfacing category, helping buyers locate it among PVC edgebanding options.
Choose Bronzed Matte Steel Edgebanding .018mm Thick, 15/16 inch Width x 600 FT when a bronzed matte steel edge is needed to align with similar decorative surfaces. The PVC material, slim thickness, and 15/16 inch width work together to support clean, flush edge treatment on suitable panels. The 600 FT roll length and specific Rehau, Inc. part 716041-612 let shops repeat the same bronzed matte steel look across multiple projects while drawing from one consistent PVC edgebanding source.
Sold In: 1 Roll