Medium Tone Edgebanding 3mm Thick, 1-15/16" Width x 300 FT

Medium Tone Edgebanding 3mm Thick For Clean Edges

Medium Tone Edgebanding 3mm Thick gives you a PVC edge treatment in a medium tone that finishes exposed board edges to match surrounding surfacing. The 3mm thickness builds a solid edge profile that stands out visually and defines the cabinet or panel edge line. The 1-15/16 inch width covers common substrate thicknesses while allowing trimming on both faces for a tight, straight edge detail. The 300 FT length on a single roll supports longer runs so edge banding stays consistent from cabinet to cabinet. As a PVC edgebanding in a medium tone, it ties into typical edgebanding and surfacing work where color tone and edge profile alignment matter.

Key Medium Tone PVC Edgebanding Advantages

• The 3mm thick PVC construction creates a substantial edge that transitions cleanly from face to edge, helping panels present a finished, uniform look along every exposed side.
• The 1-15/16 inch width gives coverage beyond standard board thickness, allowing installers to trim flush on both faces and maintain a straight, accurate edge line.
• The 300 FT roll length supports multiple cabinets or longer panel runs from the same color lot, which keeps the medium tone appearance consistent across a project.
• The medium tone color works with medium-colored surfacing layouts, letting the edge visually blend with adjacent Rehau, Inc. surfacing choices in the same tone family.
• The PVC edgebanding material aligns with typical edgebanding and surfacing category work, fitting into established shop workflows for cutting, banding, and finishing edges.

Edgebanding Dimensions That Support Straight Installs

The 1-15/16 inch width on this Rehau PVC edgebanding gives extra material beyond the substrate faces, so trimming equipment can cut both sides flush without starving the edge. The 3mm thickness provides a defined shoulder that tracks well against trimming tools for repeatable cuts. With a 300 FT length, the same Medium Tone Edgebanding 3mm Thick roll can run through sets of cabinet components so edges align in tone and profile from part to part.

How This Rehau PVC Edgebanding Fits Real Work

Using Medium Tone Edgebanding On Panels

This Medium Tone Edgebanding 3mm Thick, 1-15/16 inch Width x 300 FT is positioned for edgebanding and surfacing jobs where a medium tone edge is required on panel or cabinet components. In the Edgebanding & Surfacing category, it serves as the edge treatment that finishes raw panel edges to match the chosen decor. The 3mm thickness establishes a noticeable edge band that visually frames the panel face, which matters where the cabinet design calls for a pronounced edge. The 1-15/16 inch width supports typical woodworking panels by spanning the board thickness and leaving trim allowance, so the finished edge lines up cleanly with the panel faces. As a Rehau, Inc. edge banding product, it fits into projects that standardize on that manufacturers edgebanding and surfacing options.

Dimensions And Length For Repeatable Results

The 3mm thick PVC design gives the edge enough mass to guide trimming along the length of the workpiece, which helps keep the cut smooth from end to end. Because the width is 1-15/16 inch, there is room to align the band slightly proud of the board on both sides, then trim back to create a uniform reveal. The 300 FT roll length reduces color breaks on a run of cabinets, since doors, drawer fronts, and panels can draw from the same Medium Tone Edgebanding 3mm Thick supply. That length also supports production-style workflows where multiple pieces move through the same edgebanding setup without frequent material changes.

Common Questions About This Medium Tone Edgebanding

Select This Edgebanding For Medium Tone Projects

This Rehau, Inc. Medium Tone Edgebanding 3mm Thick, 1-15/16 inch Width x 300 FT gives a PVC edge solution that matches medium tone surfacing work. The 3mm thickness and generous width support clean, flush trimming on cabinet and panel edges. With its 300 FT length and defined dimensions, this edge banding fits straightforwardly into edgebanding and surfacing workflows that call for a consistent medium tone finish.