Pearwood edgebanding from Rehau, Inc. is PVC edge banding designed to cover raw panel edges and create a consistent pearwood-look finish across cabinet or furniture projects. The .018mm thick construction provides a slim, low-profile edge treatment that blends closely with matching surfaces, which helps keep panel thickness changes visually minimal at the edge. The 15/16 inch width works with standard panel thicknesses, giving enough coverage to fully cap the edge while leaving reasonable trim allowance for clean routing or flushing. The 600 FT length supports longer runs in shops working on multiple cabinets or casework, reducing roll changes during repetitive edging work. As PVC edgebanding, this product supports typical edgebanding workflows where installers need a uniform synthetic edge in a pearwood appearance across plywood, particleboard, or similar substrates in woodworking environments.
The .018mm thickness on this Pearwood PVC edgebanding keeps the material lean at the edge, which helps routers and trimmers remove overhang without creating a bulky transition. The 15/16 inch width gives enough extra material beyond typical panel thickness to allow precise alignment before trimming, supporting straight, chip-free edges when flush-cut. With 600 FT on a single roll, shops can set up edgebanding equipment once and run consecutive parts without frequent material changes, which can help maintain consistent feed settings and edge quality throughout a batch of cabinet or furniture components.
This Pearwood edgebanding .018mm thick, 15/16 inch width x 600 FT from Rehau, Inc. fits woodworking projects that rely on panel construction, such as cabinets, casework, and furniture using engineered wood cores. As part of the Edgebanding & Surfacing category in edge banding class, it is suited to covering exposed edges on plywood, particleboard, or similar substrates used in shop-built components. The pearwood appearance ties visually to pearwood-style laminates or surfaces within the same build, supporting a coordinated edge treatment on doors, shelves, and cabinet sides. The long 600 FT length allows shops to keep color and finish consistent across many parts within a single project using the same roll.
The combination of .018mm thickness and 15/16 inch width gives installers predictable behavior when feeding this Pearwood PVC edge banding through edgebanders or applying by other standard methods. The thin profile helps trimming tools cut the overhang flush with less resistance at the edge, which contributes to a smoother finished line between banding and panel faces. The width provides enough margin for positioning on standard panels so that minor alignment variations during application can still be trimmed back to a straight, clean edge without revealing the core. With a 600 FT roll, settings on edgebanding equipment can remain consistent across many parts, supporting uniform edges on cabinet runs or matching furniture pieces. Identifying this product by manufacturer part number 301674-938 helps shops reorder the same pearwood look and dimensions, maintaining continuity when repeating successful setups on future projects.
The Pearwood edgebanding is .018mm thick and 15/16 inch wide, providing a slim profile with enough width to cover standard panel edges and allow trimming for a clean, finished edge.
The roll length is 600 FT, which supports edging multiple cabinets or furniture components from a single roll, helping keep edge color and appearance consistent across a project.
This product is PVC edgebanding, so it provides a synthetic edge treatment suited to common woodworking environments that use panel-based construction and decorative surfaces.
The .018mm thickness creates a lean edge, allowing trimming tools to remove overhang cleanly and helping keep the transition between face and edge visually subtle after flush cutting.
The 15/16 inch width gives coverage over typical panel thickness plus a small overhang, so installers can align the banding, trim back excess, and still keep the core fully concealed.
Part number 301674-938 identifies this specific Pearwood PVC edgebanding in .018mm thickness, 15/16 inch width, and 600 FT length for accurate selection and consistent reordering.
This Pearwood edgebanding .018mm thick, 15/16 inch width x 600 FT from Rehau, Inc. gives woodworking shops a defined size, material, and pearwood appearance for finishing panel edges. The combination of thin PVC construction, 15/16 inch width, and extended 600 FT length supports consistent edging across cabinet and furniture runs. When a project calls for a pearwood-look edge on engineered wood components, this edge banding provides a matching treatment that aligns visually with coordinated surfaces while fitting into standard edgebanding workflows.
Sold In: 1 Roll