Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hardrock Maple edgebanding from Rehau, Inc. is a PVC edge banding designed to finish exposed panel edges in woodworking projects that call for a Hardrock Maple look. The 1.2mm thickness gives the edge a substantial feel, which helps match thicker panel constructions visually. The 15/16 inch width covers standard panel thickness with a bit of tolerance, supporting a flush trim without exposing the core. The ABS LASR material description identifies it as a thermoplastic banding suited to typical cabinet and casework environments. The 600 FT length in each continuous roll reduces changeovers on larger runs, helping maintain consistent appearance across multiple parts. Under Wurth Baer Supply item 753458 and manufacturer part 315609-001, the product can be specified clearly in shop documents for repeat orders and job costing.
This edge banding is identified as 1.2mm thick, which fits workflows that expect a slightly heavier edge than thin tape-style banding. The 15/16 inch width suits panels where the finished edge needs full coverage with a small trim allowance on both faces. Being categorized as PVC Edgebanding signals that it is used in typical edge banding operations on cabinet components and panels. The Hardrock Maple description ties it to projects using Hardrock Maple decorative surfaces, helping the edge finish support the overall design intent. With a defined roll length of 600 FT, shops can plan linear footage needs for runs of shelving, cabinet sides, and fronts without mid-job changes.
This Hardrock Maple edgebanding is part of the Edge Banding product class, positioning it for use on exposed edges of panels in cabinets, furniture, and other woodworking assemblies. The 1.2mm thickness gives an edge profile that pairs well with melamine or laminate-faced boards needing a solid-looking perimeter. Its 15/16 inch width fits panel edges where a slight overhang is preferred before trimming, supporting consistent results on straight cabinet sides and shelving. The Hardrock Maple color identity means it can be matched to Hardrock Maple decorative faces so doors, drawer fronts, and carcass parts read as a coordinated set. The 600 FT roll length is practical for production shops running multiple cabinets or repeated components that all require the same edge detail.
The defined 1.2mm thickness of this Rehau, Inc. edge banding helps machines and operators set expectations for the final edge reveal, aiding in repeatable trimming and scraping passes. Its classification as PVC Edgebanding means it is intended for standard edge banding processes, so setups can be aligned with typical PVC cutting and finishing practices. The 15/16 inch width allows slight alignment tolerance when feeding panels, reducing risk of exposing the substrate after trimming. The Hardrock Maple designation helps designers and shop staff communicate clearly about color and pattern in drawings and cut lists. Using the specific manufacturer part number 315609-001 with the Wurth Baer Supply reference ensures the same banding can be reordered for repairs, additions, or later project phases while holding the edge appearance consistent.
This Hardrock Maple edgebanding is an Edge Banding product used to finish exposed edges on panels for cabinets, furniture, and similar woodworking projects needing a Hardrock Maple appearance.
The 1.2mm thickness creates a more substantial edge profile, which helps the finished edge look solid and closer in presence to thicker decorative panel faces.
The 15/16 inch width covers typical panel thickness with slight overhang, giving trimming tools room to cut back to a clean, flush edge without exposing the core.
The 600 FT roll length supports longer production runs, helping maintain the same Hardrock Maple edge look across many doors, drawer fronts, or carcass parts.
The Hardrock Maple description indicates the edge banding is styled to coordinate with Hardrock Maple surfaces, supporting a unified appearance between faces and edges.
Part number 315609-001 uniquely identifies this Rehau Hardrock Maple edgebanding, helping shops specify, reorder, and track the exact edge material used on a job.
This Hardrock Maple edgebanding from Rehau, Inc., listed by Wurth Baer Supply as item 753458, combines a 1.2mm thickness with a 15/16 inch width and a 600 FT roll length to support continuous Hardrock Maple edge work. The ABS LASR PVC construction and Edge Banding classification position it for standard cabinet and panel edging tasks where the edge appearance needs to align with Hardrock Maple faces. Select this specific 315609-001 product when a defined Hardrock Maple edge detail is required across multiple components in the same project.
Sold In: 1 Roll