Water Borne Glaze Base Clear, 1 Quart - Ml Campbell 000N22034-14
Description
Water Borne Glaze Base Clear For Color Effects
Water Borne Glaze Base Clear is a ML Campbell waterborne tint base designed to create controlled glaze color on professional wood finishing jobs. This glaze base can be used with MLC waterborne or solventborne products, so it supports finishing shops that run mixed systems without changing workflows between sealers and topcoats. The product is GREENGUARD certified and HAPs free, which supports jobs that must meet stricter indoor air quality and emissions criteria during and after finishing. Its formulation is described as low VOC, so it reduces total solvent load compared to conventional solventborne glazes. Water Borne Glaze is designed to develop color depth, profile hang-up, and an antique look, which allows finishers to highlight profiles and moldings without heavy film build. Glazes should always have a clear topcoat to provide system protection, so this glaze becomes one controlled color step within an overall MLC finishing system.
Key Water Borne Glaze Details For Finishers
- Water Borne Glaze can be used with MLC waterborne or solventborne products, so finish rooms that already spray compatible sealers, stains, and topcoats can add glaze steps without changing product families.
- The glaze is a low VOC tint base, which reduces solvent emissions during application and drying, helping finishing operations align with projects that prioritize reduced VOC output.
- N22034 is GREENGUARD certified and HAPs free, which supports specifications that call for certified coatings with no hazardous air pollutants in the glaze layer of the system.
- Water Borne Glaze is formulated to provide a longer working open time, which gives finishers time to move, wipe, and adjust glaze on larger doors, panels, or assemblies before it sets.
- Water Borne Glaze has an open time of almost an hour and can be wiped off using a wet rag, which allows controlled clean-up of excess glaze from profiles and flat areas while maintaining the desired hang-up.
- Water Borne Glaze is designed to develop color depth, profile hang-up, and an antique look, which helps create consistent decorative finishes on cabinets, trim, and other detailed woodwork.
Using Water Borne Glaze In Finish Sequences
Water Borne Glaze is to be used with water borne MLC sealers, stains, and topcoats, both pigmented and clear, so it drops directly into multi-step finishing schedules built around ML Campbell products. Because Water Borne Glaze is a tint base formulated for a longer working open time, it supports application over sealed surfaces where the finisher needs time to move glaze into profiles and then wipe back. The glaze can be wiped off using a wet rag, so excess material can be removed from flat areas while leaving controlled color in moldings and recesses. Glazes should always have a clear topcoat to provide system protection, so once color depth and antique character are set, the finisher can lock the effect under the chosen MLC clear or pigmented topcoat.
Where This ML Campbell Glaze Works Best
Glaze Application On Profiles And Details
Water Borne Glaze is designed to develop color depth, profile hang-up, and an antique look, so it is particularly suited to doors, drawer fronts, moldings, and routed details where shadowing and accent lines are required. When used with water borne MLC sealers and stains, the glaze sits between the sealed substrate and the final topcoat, adding visual depth without changing the underlying base color. The open time of almost an hour gives the finisher time to move glaze into corners, wipe back flat sections, and balance color across multiple components on the same rack. Because the glaze can be wiped off using a wet rag, excess build in unwanted areas can be removed while leaving controlled hang-up in profiles and recesses.
Longer Open Time For Consistent Results
Water Borne Glaze is formulated to provide a longer working open time, and the stated open time of almost an hour means the product stays workable across larger assemblies or batches. This longer open time helps maintain consistent color and hang-up from part to part because the finisher is not forced into rushed wipe-off on complex layouts. Being a low VOC tint base, the glaze contributes color without the higher solvent levels of many traditional solventborne glazes, which is important on projects where total VOC from stain, glaze, and topcoat steps is being watched. N22034 is GREENGUARD certified and HAPs free, so using this glaze supports finish systems targeting certified, lower-emission interiors while still delivering the desired antique look once the clear topcoat is applied.
Common Questions About Water Borne Glaze Base Clear
What type of product is Water Borne Glaze Base Clear?
Water Borne Glaze Base Clear is a ML Campbell water borne tint base designed as a glaze layer to develop color depth, profile hang-up, and an antique look within a multi-step finish system.
Can this glaze be used with both waterborne and solventborne products?
Water Borne Glaze can be used with MLC waterborne or solventborne products, so it fits finishing operations that already run either type of compatible sealer, stain, or topcoat.
How does the longer open time affect glazing work?
Water Borne Glaze has an open time of almost an hour, giving finishers extended time to move, blend, and wipe glaze on larger or more detailed parts before it stops responding.
How can excess Water Borne Glaze be removed during finishing?
Water Borne Glaze can be wiped off using a wet rag, allowing excess material to be cleared from flats while leaving controlled color in moldings and recessed profiles.
What certifications and emissions characteristics does this glaze have?
The N22034 Water Borne Glaze is GREENGUARD certified, HAPs free, and described as a low VOC tint base, supporting finish systems that emphasize reduced emissions.
Where does this glaze sit within an MLC finish system?
Water Borne Glaze is to be used with water borne MLC sealers, stains, and topcoats, and glazes should always have a clear topcoat to provide system protection over the glaze layer.
Select Water Borne Glaze Base Clear For Controlled Antique Color
Choosing ML Campbell Water Borne Glaze Base Clear provides a GREENGUARD certified, HAPs free, low VOC tint base that integrates with MLC water borne sealers, stains, and topcoats. The glaze is formulated to provide a longer working open time with an open time of almost an hour, so finishers can develop color depth, profile hang-up, and an antique look at a controlled pace. Because Water Borne Glaze can be used with MLC waterborne or solventborne products and wiped off using a wet rag, it supports repeatable glaze work across detailed cabinetry and trim once locked under a clear topcoat.