Edgebanding 59488AAM Umbria Elme is a Doellken Woodtape edge banding designed to cover and protect exposed panel edges, so cabinet and furniture projects get a finished, professional look that matches surrounding surfacing material on the job.
This edge banding is 1mm thick, giving the edge a defined profile that helps hide minor core irregularities while maintaining a sturdy edge detail that stands up to routine handling in everyday use.
The 15/16 inch width provides coverage across typical panel thicknesses in woodworking applications, giving a slight overhang for trimming so installers can flush the edge precisely to the panel surface during fabrication.
The PVC construction listed in the product category aligns this edge banding with common cabinet and surfacing workflows, so shops working with PVC edgebanding and similar materials can integrate it into existing equipment setups and processes.
The manufacturer part number 59488AAM-1540-300 clearly identifies this specific Umbria Elme design and size, helping installers match it to job specifications and maintain consistency across repeat projects where the same edge appearance is required.
The 1mm thickness of Edgebanding 59488AAM Umbria Elme works well in edgebanding workflows that call for a defined, slightly heavier edge, giving edgebanders and trimmers enough material to cut cleanly without chatter on the edge.
With its 15/16 inch width, this edge banding suits projects using panels in the common range around that dimension, giving installers margin to align the tape during application and then trim top and bottom edges back to a flush finish.
The PVC edgebanding classification places this product in a familiar material family for many woodworking shops, so existing settings, tooling choices, and handling practices for PVC edge banding can be applied to this Umbria Elme variant.
The manufacturer part number 59488AAM-1540-300 gives a clear reference for drawings, cut lists, and purchasing notes, so each production run can call out and receive the same edge material specified in the original design.
Edgebanding 59488AAM Umbria Elme is identified as PVC edge banding in the Edgebanding & Surfacing category, so it fits naturally on exposed edges of panels used in cabinetry, furniture, and other surfacing-focused woodworking installations.
The 15/16 inch width is suited to covering the edge of panels sized around that dimension, providing enough overhang during application so installers can trim back to the face without leaving gaps, which supports consistent visual lines on cabinet runs.
The 1mm thickness offers a stable band of material along the edge, giving edgebanders a reliable amount of PVC to process, which helps reduce edge blowout or thin spots during trimming on cabinet doors, drawer fronts, and casework sides.
The Umbria Elme decor, referenced in both the product name and the SAP description, positions this edge banding as a coordinated choice for projects that specify that same Umbria Elme look across boards and surfacing components in the design.
The Doellken Woodtape branding aligns this product with a recognized edge banding line, which helps buyers standardize on a single manufacturer across multiple cabinet series when matching decors and maintaining continuity from one job to the next.
The defined 1mm thickness of this PVC edge banding gives a predictable edge size for edgebander setup, which helps operators dial in feed speed and trimming positions to achieve repeatable cuts and reduce rework on production runs.
The 15/16 inch width provides a consistent starting point for trimming operations, allowing the same offset and tooling passes to be used across panels, which supports efficient throughput and more uniform finished edges on cabinets and case goods.
The specific manufacturer part number 59488AAM-1540-300 ties all these dimensions and the Umbria Elme decor together under one code, so purchasing, scheduling, and shop-floor teams reference the same product when planning and executing work.
The SAP description 15/16'X1MM UMBRIA ELME 300FT reinforces the dimensional and decor details in a short text format, which helps reduce selection errors when multiple edge banding sizes and designs are stored or listed side by side in inventory.
The PVC edgebanding classification in the product category signals that this material is part of a consistent PVC workflow, so once settings are established on equipment for this edge banding type, shops can apply them across similar PVC jobs with confidence.
Edgebanding 59488AAM Umbria Elme is a PVC edge banding from Doellken Woodtape, used to cover and finish exposed panel edges so cabinet and furniture parts have a coordinated, finished appearance.
This Umbria Elme edge banding is 1mm thick, giving a defined, durable edge profile that supports clean trimming and helps hide small substrate imperfections along cabinet and furniture edges.
The 59488AAM-1540-300 edge banding is 15/16 inch wide, providing coverage and a usable trimming margin on standard panel edges used in many cabinetry and surfacing applications.
This product is listed in the Edgebanding, PVC category, placing it in the PVC edgebanding family that many woodworking shops use with common edgebanders and trimming setups.
The Umbria Elme decor is identified by the code 59488AAM in both the product name and manufacturer part number, helping teams specify and reorder the same appearance.
The SAP description 15/16'X1MM UMBRIA ELME 300FT summarizes the width, thickness, and Umbria Elme decor, giving buyers a concise reference for matching size and design.
Edgebanding 59488AAM Umbria Elme from Doellken Woodtape provides a 1mm thick, 15/16 inch wide PVC edge banding sized for cabinet and surfacing work, so you can match Umbria Elme edges to your panels and keep projects visually consistent.
The clear 59488AAM-1540-300 identification and concise SAP description support straightforward specifying and reordering, so shops can align purchasing and production around the same edge banding on every Umbria Elme job.
Sold In: 300 Lineal Ft