Doellken PVC Edgebanding 15/16" x 1 mm, Gregio Pine, 300', 8198AA 1540 10

Edgebanding 8198AA Gregio Pine 1mm For Clean Edges

Edgebanding 8198AA Gregio Pine 1mm is a PVC edge banding from Doellken Woodtape that covers and finishes exposed panel edges in Gregio Pine designs. The 1mm thickness provides a solid edge profile that supports everyday use on cabinet, furniture, or fixture projects. The 15/16 inch width matches common panel thicknesses, so the banding can be aligned and trimmed to leave a tight, flush edge. The Gregio Pine design gives projects a coordinated edge option when working with matching surfaces, helping maintain a consistent look across panels. With a length of 300ft, this edge banding roll supports multiple cabinets or a full job run before changeover. The PVC construction fits the Edgebanding, PVC category, making it a practical choice where a PVC edge solution is specified.

Key Edgebanding 8198AA Gregio Pine Job Advantages

• The 1mm thick PVC construction creates a substantial edge layer, which helps panels handle normal handling while leaving enough material for clean trimming passes along the edge.
• The 15/16 inch width is sized for typical panel thicknesses, letting installers cover the full edge face and then trim flush without exposing the core material.
• The Gregio Pine design aligns with Gregio Pine style surfaces, helping shops maintain a consistent visual transition from face to edge on coordinated projects.
• The 300ft length per roll supports longer production runs, reducing changeover time between cuts and helping maintain consistent settings on edgebanding equipment.
• The Doellken Woodtape brand and 8198AA-1540-10 part number provide a clear product reference, which helps repeat ordering and matching across projects using the same finish.

Edgebanding 8198AA Gregio Pine Fit And Application

This Edgebanding 8198AA Gregio Pine 1mm Thick x 15/16 inch Width product is designed as edge banding for panel work where a Gregio Pine look is required. The 15/16 inch width pairs well with panels near three-quarter-inch class thicknesses, allowing alignment on one face and trimming on the opposite face for a straight, uniform result. The PVC material places this product in the Edgebanding, PVC category, so it fits jobs calling for PVC edge treatment rather than a different material class. The 1mm thickness helps provide an edge that can be trimmed and finished to a smooth profile without feeling overly thin on the workpiece.

Using This PVC Edge Banding In Woodworking

Where This Gregio Pine Edge Banding Works Best

The Edgebanding 8198AA Gregio Pine 1mm Thick x 15/16 inch Width product is suited to woodworking projects that rely on Gregio Pine style faces and need a coordinated PVC edge treatment. The 15/16 inch width covers the full edge on panels in that size range so fabricators can run the edge banding slightly proud and trim back to a clean line. The 300ft roll format supports cabinet shops and woodworkers handling multiple panels in a job, allowing repeated passes on edgebanders without frequent roll changes. Because this product belongs to the Edgebanding, PVC category, it fits projects that standardize on PVC edging for cabinets, casework, or fixtures that see routine handling.

Details That Support Consistent Edge Results

The 1mm thickness on this Doellken Woodtape edge banding gives installers enough material to work with during trimming and finishing, helping maintain a straight edge even when the panel sees repeated use. The Gregio Pine design allows the edge to visually match Gregio Pine style faces, which supports a uniform look across cabinet doors, drawer fronts, or shelves using the same decor. The 8198AA-1540-10 manufacturer part number provides an exact reference, so shops can order the same edge banding again when matching prior work, reducing the risk of finish variance. With its 300ft length, the roll supports continuous production runs, helping shops keep machine setups stable and edge quality consistent from first part to last part on the job.

Common Questions About Gregio Pine 1mm Edge Banding

Select Edgebanding 8198AA Gregio Pine For Matching Jobs

The Edgebanding 8198AA Gregio Pine 1mm Thick x 15/16 inch Width 300ft roll from Doellken Woodtape gives shops a defined PVC edge solution when Gregio Pine style surfaces are in use. The 1mm thickness, 15/16 inch width, and 300ft length work together to support consistent trimming, full edge coverage, and longer runs on edgebanding machines. For projects built around Gregio Pine decor, this 8198AA-1540-10 edge banding provides a clear, repeatable option that aligns panel faces and edges across cabinets and casework.