Edgebanding 8189E5 Pasadena Oak 1mm is a Doellken Woodtape PVC edge banding designed to finish exposed panel edges in a Pasadena Oak look. The 1mm thickness provides a defined edge profile, which helps create a solid, substantial edge appearance on cabinets and casework. The 15/16 inch width is sized to cover standard panel thickness with trim allowance, supporting a neat edge after trimming and flushing. Being part of the Edgebanding & Surfacing category, it works as the face material on exposed edges, tying edge appearance to the main surface. The Doellken Woodtape brand signals that this is a dedicated edge banding product, which helps installers match it to their edgebanding equipment and routines. The SAP description notes a 300FT length, giving shops a continuous run that supports longer projects without frequent roll changes.
This Doellken Woodtape edge banding uses a 1mm thickness, giving edgebanders a consistent material layer to heat, press, and trim, which supports predictable setup across multiple runs. The 15/16 inch width provides margin beyond typical panel thickness, so after application the overhang can be trimmed back to a flush edge while retaining full coverage. As a PVC product in the Edgebanding & Surfacing category, it is intended for standard edge banding machines and trimming tools used on cabinetry and furniture panels. The defined thickness and stated width work together to support repeatable fit, allowing operators to dial in settings once and maintain consistent edge results across projects using the same Pasadena Oak design.
This edge banding is identified as Edgebanding 8189E5 Pasadena Oak 1mm Thick x 15/16 inch Width, placing it in the Edgebanding & Surfacing category for panel edge finishing. The Pasadena Oak designation ties it to projects that use Pasadena Oak surfacing, supporting consistent color and pattern from face to edge on cabinets, shelves, and casework. The 1mm thickness suits panel-based construction where a defined edge profile is preferred, letting shops present a more substantial edge compared to very thin tape. With a width of 15/16 inch, it is sized for common engineered panel thicknesses used in cabinetry and furniture, giving trim margin for straight-line and contour edges. The 300FT reference in SAP Description means a single roll can support a run of multiple components with the same Pasadena Oak design, helping organize work by color and pattern in the shop.
The 1mm thick PVC construction gives edgebanding machines a stable material layer to heat and press, which supports consistent adhesive activation and pressure settings across repeated runs. That thickness also helps trimming tools maintain a clean edge without tearing through a flimsy layer, which matters when panels are handled and transported. The 15/16 inch width provides intentional overhang relative to typical panel thicknesses, so operators can rely on their trimmers to bring the edge back to flush while maintaining full edge coverage. This extra margin is valuable on slightly out-of-square or varied panels, because the banding still spans the full thickness after trimming. The 300FT roll length reduces the number of roll changes on a given color, which helps keep machine settings stable and maintains visual consistency across multiple cabinet parts finished in the Pasadena Oak design.
The product name, web description, and SAP description all specify Pasadena Oak, so the edge banding is intended to present a Pasadena Oak appearance on finished panel edges.
The Doellken Woodtape Pasadena Oak banding is 1mm thick, which provides a defined edge layer that supports clean trimming and a more substantial edge profile on cabinets and panels.
The 15/16 inch width is intended to cover typical panel thicknesses with extra margin, so trimming tools can cut back to a flush edge while still keeping full edge coverage.
The SAP description specifies 300FT, giving shops enough length for multiple cabinet or casework parts in the same Pasadena Oak design run.
This Pasadena Oak product is listed under Edgebanding & Surfacing and Edgebanding, PVC, indicating a PVC edge banding used to finish exposed panel edges.
The manufacturer part number is 8716E5-1540-300, which identifies this specific 1mm thick, 15/16 inch wide, Pasadena Oak 300FT edge banding from Doellken Woodtape.
Choosing Edgebanding 8189E5 Pasadena Oak 1mm Thick x 15/16 inch Width aligns your project with a clearly defined Doellken Woodtape PVC edge banding in the Pasadena Oak design. The 1mm thickness, 15/16 inch width, and 300FT length work together to support consistent edge finishing on Pasadena Oak-based cabinets and casework. For shops organizing work by decor and dimension, the named PASADENA OAK 300FT description and the 8716E5-1540-300 manufacturer reference give precise identification, helping you match this edge banding to projects that require this specific design.