Edgebanding 8717 Palisades Oak .018" Thick x 15/16" Width is a PVC edge banding from Doellken Woodtape that covers and protects raw board edges, so cabinet and furniture projects have a consistent Palisades Oak look along exposed sides. The .018 inch thickness gives a slim edge profile that blends closely with modern panel materials, which helps maintain clean lines on doors, drawer fronts, and casework. The 15/16 inch width provides coverage for common panel thicknesses with a bit of overhang for trimming, which supports tight, flush edges after processing. The Palisades Oak design ties into matching Palisades Oak surfaces, so visible edges line up with the face material for a unified appearance. As a PVC product in the Edgebanding & Surfacing category, it is suited to edging applications where a synthetic band is preferred over wood, helping standardize materials across production runs.
This Edgebanding 8717 Palisades Oak .018" Thick x 15/16" Width PVC edge banding matches panel edges by combining slim thickness with practical width, so fabricators can dress exposed board edges without excessive material waste. The .018 inch thickness works well where a refined edge profile is needed, which supports clean transitions from surface to edge on cabinet components. With its 15/16 inch width, the band overhangs a typical 3/4 inch substrate, giving room to trim both faces and the ends, which helps installers dial in flush edges after bonding. Being categorized as Edgebanding, PVC aligns this material with common PVC edgebanding equipment and workflows, so shops can route, trim, and finish edges using standard processes built around synthetic bands.
Edgebanding 8717 Palisades Oak .018" Thick x 15/16" Width is positioned for woodworking and cabinet projects handled through Wurth Baer Supply, so it fits into shop workflows that already rely on their edgebanding and surfacing materials. As a PVC edge banding in the Edgebanding & Surfacing category, it suits panel-based construction where exposed edges need a matching Palisades Oak finish, such as cabinet sides, shelving, and door fronts. The .018 inch thickness supports applications where a low-profile edge is desired, which keeps the transition between face material and edge discreet on modern flat-panel designs. With a 15/16 inch width, this band works for edging common panel thicknesses used in cabinetry and furniture, giving installers enough material to trim cleanly while keeping waste under control across repeated runs.
The defined .018 inch thickness of this Doellken Woodtape edgebanding supports repeatable machine settings, because edge-banders can be dialed in around a consistent PVC gauge for trimming and scraping. That helps maintain uniform edge quality across batches of cabinet components. Its 15/16 inch width gives a predictable margin beyond typical substrate thickness, which simplifies setup for flush trimming along both faces without leaving gaps or overexposed band. The specific Palisades Oak design and the manufacturer part number 8717-1518-1 make it straightforward to match existing projects that already use this edge, supporting accurate color and pattern continuity on reorders. Being PVC Edgebanding & Surfacing from Wurth Baer Supply ties the product into a broader material system, which can streamline material planning when a shop standardizes on Palisades Oak finishes.
Edgebanding 8717 Palisades Oak is classified as Edgebanding, PVC, so it uses a PVC construction suited to synthetic edge banding workflows in cabinet and furniture production.
The Doellken Woodtape 8717-1518-1 edgebanding is .018 inch thick, which provides a slim edge profile that works well with standard trimming and finishing equipment.
The 15/16 inch width extends beyond a typical panel edge, giving room for trimming front and back faces so finished edges sit flush with the board surface.
The Palisades Oak design lets the edge banding visually match Palisades Oak surfaces, keeping cabinet doors, shelves, and panels consistent around visible edges.
Manufacturer part number 8717-1518-1 identifies this specific Palisades Oak .018 inch thick, 15/16 inch wide PVC edge banding for straightforward ordering and reordering.
This Palisades Oak PVC edgebanding is offered through Wurth Baer Supply, a specialty distributor to the woodworking industry, aligning it with other shop-focused materials.
Choose Edgebanding 8717 Palisades Oak .018" Thick x 15/16" Width when a Palisades Oak PVC edge is needed to finish exposed panel edges. The Doellken Woodtape construction, defined .018 inch thickness, and 15/16 inch width support consistent results across cabinet and furniture runs. Ordering this specific 8717-1518-1 part through Wurth Baer Supply aligns edge materials with broader edgebanding and surfacing selections, helping shops keep Palisades Oak projects visually coordinated from face to edge.